Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 140 hp — Stage 1 file (+30 hp)
hp
Stage 1 file for Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 140 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 140 hp ECU
Hyundai Starex - H-1 - H200 - i800 (2006 - TQ) 2.5 CRDI 140 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 140 to 170 hp (+30 hp, +21%) and torque from 314 to 400 Nm (+86 Nm). This engine ships with different ECU variants: Bosch EDC15C7, Bosch EDC16CP39. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2006 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The Hyundai range covers compacts, saloons, crossovers, SUVs and commercial vehicles (HD). The Hyundai diesel range is shared with Kia and Genesis within the group.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. Stage 1 on a mid-range Hyundai CRDi delivers a noticeable torque gain. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
How much horsepower does Stage 1 add for the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 140 hp?
The Stage 1 gain for the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 140 hp is 30 hp (+21%) over the stock 140 hp, for a total of 170 hp. Torque rises from 314 to 400 Nm (+86 Nm).
What is Stage 1 chip tuning for the Hyundai Starex - H-1 - H200 - i800?
Stage 1 chip tuning of the Hyundai Starex - H-1 - H200 - i800 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +30 hp with no hardware changes.
Can you do Stage 1 on the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 140 hp?
Yes, Stage 1 for the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 140 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Hyundai Starex - H-1 - H200 - i800?
Stage 2 on the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 140 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECUs are found on the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 140 hp?
The Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 140 hp was fitted with different ECUs depending on the year and trim: Bosch EDC15C7, Bosch EDC16CP39. The write method (OBD, Bench, Boot) is determined when the unit is read.
What happens to the Hyundai Starex - H-1 - H200 - i800 warranty after chip tuning?
The factory warranty of the Hyundai Starex - H-1 - H200 - i800 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Hyundai Starex - H-1 - H200 - i800 take?
On the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 140 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Hyundai Starex - H-1 - H200 - i800?
Yes, the original ECU firmware of the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 140 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Hyundai Starex - H-1 - H200 - i800?
Stage 1 for the Hyundai Starex - H-1 - H200 - i800 2.5 CRDI 140 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.