Hyundai Santa Fe 2.2 CRDI 155 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Hyundai Santa Fe 2.2 CRDI 155 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Santa Fe 2.2 CRDI 155 hp ECU
Hyundai Santa Fe (2005 - CM) 2.2 CRDI 155 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 155 to 180 hp (+25 hp, +16%) and torque from 335 to 390 Nm (+55 Nm). ECU — Bosch EDC16C39. Flashing method: OBD or Bench depending on the unit's protection. The 2005 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
IONIQ is Hyundai's standalone electric brand (IONIQ 5, 6, 7). On older Hyundai CRDi engines, Stage 1 goes in over OBD with no complications.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. Stage 1 on a mid-range Hyundai CRDi delivers a noticeable torque gain. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
What power gain do you get after chip tuning the Hyundai Santa Fe 2.2 CRDI 155 hp?
After Stage 1 the power of the Hyundai Santa Fe 2.2 CRDI 155 hp rises from 155 to 180 hp, a gain of 25 hp (+16%). Torque rises from 335 to 390 Nm (+55 Nm).
How does Stage 1 differ from stock on the Hyundai Santa Fe?
Stage 1 on the Hyundai Santa Fe 2.2 CRDI 155 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.2 CRDI 155 hp?
Stage 1 on the Hyundai Santa Fe 2.2 CRDI 155 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Hyundai Santa Fe 2.2 CRDI 155 hp?
Stage 2 on the Hyundai Santa Fe 2.2 CRDI 155 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Hyundai Santa Fe 2.2 CRDI 155 hp run?
The control unit of the Hyundai Santa Fe 2.2 CRDI 155 hp is the Bosch EDC16C39. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Hyundai Santa Fe?
Stage 1 on the Hyundai Santa Fe voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Hyundai Santa Fe 2.2 CRDI 155 hp done?
The full remap cycle for the Hyundai Santa Fe — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Hyundai Santa Fe?
The original Hyundai Santa Fe ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Hyundai Santa Fe 2.2 CRDI 155 hp?
The cost of Stage 1 for the Hyundai Santa Fe 2.2 CRDI 155 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.