Hyundai i30 1.6 CRDI 116 hp — Stage 1 file (+29 hp)
hp
Stage 1 file for Hyundai i30 1.6 CRDI 116 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai i30 1.6 CRDI 116 hp ECU
Hyundai i30 (2011 - GD) 1.6 CRDI 116 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 116 to 145 hp (+29 hp, +25%) and torque from 255 to 325 Nm (+70 Nm). ECU — Bosch EDC16C39. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. A diesel built in 2011 — the Tricore ECU era; OBD flash works on most production revisions.
Hyundai is a Korean carmaker, founded in 1967 in Seoul. DPF/SCR with AdBlue is standard on Euro-6 Hyundai diesels.
Stage 1 on a mid-range Hyundai CRDi delivers a noticeable torque gain. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe.
Frequently asked questions
How much does the power of the Hyundai i30 1.6 CRDI 116 hp increase after Stage 1?
Stage 1 for the Hyundai i30 1.6 CRDI 116 hp adds +29 hp — power increases from 116 to 145 hp (+25%). Torque rises from 255 to 325 Nm (+70 Nm).
What does a Stage 1 remap of the Hyundai i30 1.6 CRDI 116 hp include?
Stage 1 on the Hyundai i30 1.6 CRDI 116 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +29 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.6 CRDI 116 hp?
Stage 1 on the Hyundai i30 1.6 CRDI 116 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Hyundai i30 1.6 CRDI 116 hp?
Stage 2 for the Hyundai i30 1.6 CRDI 116 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Hyundai i30 1.6 CRDI 116 hp run?
The control unit of the Hyundai i30 1.6 CRDI 116 hp is the Bosch EDC16C39. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Hyundai i30?
Stage 1 on the Hyundai i30 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Hyundai i30 1.6 CRDI 116 hp done?
The full remap cycle for the Hyundai i30 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Hyundai i30?
The original Hyundai i30 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Hyundai i30 1.6 CRDI 116 hp?
The cost of Stage 1 for the Hyundai i30 1.6 CRDI 116 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.