Hyundai i30 1.6 CRDI 90 hp — Stage 1 file (+55 hp)
hp
Stage 1 file for Hyundai i30 1.6 CRDI 90 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai i30 1.6 CRDI 90 hp ECU
Hyundai i30 (2006 - FD) 1.6 CRDI 90 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 90 to 145 hp (+55 hp, +61%) and torque from 235 to 325 Nm (+90 Nm). ECU — Bosch EDC16C39. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. Diesel engines built in 2006 — the era of classic Common Rail without strong encryption.
Hyundai is the core of the Hyundai Motor Group. The Hyundai community in Eastern Europe and the CIS does a large volume of diesel chip tuning.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. On naturally aspirated Hyundai engines, the main effect is on throttle response. Low-output Hyundai engines are city units, and Stage 1 is safe.
Frequently asked questions
How much does the power of the Hyundai i30 1.6 CRDI 90 hp increase after Stage 1?
Stage 1 for the Hyundai i30 1.6 CRDI 90 hp adds +55 hp — power increases from 90 to 145 hp (+61%). Torque rises from 235 to 325 Nm (+90 Nm).
What does a Stage 1 remap of the Hyundai i30 1.6 CRDI 90 hp include?
Stage 1 on the Hyundai i30 1.6 CRDI 90 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +55 hp with no hardware changes.
Is Stage 1 safe for the low-output Hyundai i30 1.6 CRDI 90 hp?
Yes, Stage 1 on the low-output Hyundai i30 1.6 CRDI 90 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How does Stage 2 differ from Stage 1 on the Hyundai i30 1.6 CRDI 90 hp?
Stage 2 for the Hyundai i30 1.6 CRDI 90 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What control unit does the Hyundai i30 1.6 CRDI 90 hp run?
The control unit of the Hyundai i30 1.6 CRDI 90 hp is the Bosch EDC16C39. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Hyundai i30?
Stage 1 on the Hyundai i30 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Hyundai i30 1.6 CRDI 90 hp done?
The full remap cycle for the Hyundai i30 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Hyundai i30?
The original Hyundai i30 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Hyundai i30 1.6 CRDI 90 hp?
The cost of Stage 1 for the Hyundai i30 1.6 CRDI 90 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.