Hyundai Getz 1.5 CRDI 82 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Hyundai Getz 1.5 CRDI 82 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Getz 1.5 CRDI 82 hp ECU
Hyundai Getz (2005) 1.5 CRDI 82 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 82 to 102 hp (+20 hp, +24%) and torque from 187 to 230 Nm (+43 Nm). This engine ships with different ECU variants: Bosch EDC15C7, Bosch EDC16C39. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. Diesel engines built in 2005 — the era of classic Common Rail without strong encryption.
N is Hyundai's performance division (i30 N, Elantra N, Kona N). Low-output Hyundai diesels are city units, and Stage 1 is safe.
Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. On naturally aspirated Hyundai engines, the main effect is on throttle response. Low-output Hyundai engines are city units, and Stage 1 is safe.
Frequently asked questions
How many horsepower does the Hyundai Getz 1.5 CRDI 82 hp reach after a remap?
Stage 1 for the Hyundai Getz 1.5 CRDI 82 hp adds +20 hp — power increases from 82 to 102 hp (+24%). Torque rises from 187 to 230 Nm (+43 Nm).
What does a Stage 1 remap of the Hyundai Getz 1.5 CRDI 82 hp include?
Stage 1 on the Hyundai Getz 1.5 CRDI 82 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +20 hp with no hardware changes.
Is Stage 1 safe for the low-output Hyundai Getz 1.5 CRDI 82 hp?
Yes, Stage 1 on the low-output Hyundai Getz 1.5 CRDI 82 hp delivers a moderate but genuine gain — without overstressing the hardware. On base naturally aspirated engines the effect is felt mainly as improved throttle response and a stronger mid-range.
How does Stage 2 differ from Stage 1 on the Hyundai Getz 1.5 CRDI 82 hp?
Stage 2 for the Hyundai Getz 1.5 CRDI 82 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
How many ECU variants does the Hyundai Getz 1.5 CRDI 82 hp have?
The Hyundai Getz 1.5 CRDI 82 hp has 2 ECU variants: Bosch EDC15C7, Bosch EDC16C39. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.
Does Stage 1 void the warranty on the Hyundai Getz?
Stage 1 on the Hyundai Getz voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Hyundai Getz 1.5 CRDI 82 hp done?
The full remap cycle for the Hyundai Getz — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Hyundai Getz?
The original Hyundai Getz ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Hyundai Getz 1.5 CRDI 82 hp?
The cost of Stage 1 for the Hyundai Getz 1.5 CRDI 82 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.