Hyundai Accent / Verna 1.6 DPI 122 hp — Stage 1 file (+2 hp)
hp
Stage 1 file for Hyundai Accent / Verna 1.6 DPI 122 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Accent / Verna 1.6 DPI 122 hp ECU
Hyundai Accent / Verna (2017 - HC/YC) 1.6 DPI 122 hp — mass-market petrol engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 122 to 124 hp (+2 hp, +2%) and torque from 153 to 156 Nm (+3 Nm). ECU — Kefico CPGPSH3.26.1. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. A petrol engine built in 2017 — a Tricore platform without strong protection; OBD access works.
The Hyundai range covers compacts, saloons, crossovers, SUVs and commercial vehicles (HD). Smartstream is Hyundai's modern engine range with an emphasis on economy. Hyundai's factory calibration is mainstream and leaves headroom for Stage 1. T-GDI is Hyundai's badge for its direct-injection turbo petrol engines.
Stage 1 on the Hyundai T-GDI delivers a noticeable gain. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Within Hyundai Motor Group, ECUs are partly shared, so Hyundai files often work on Kia. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe.
Frequently asked questions
What power gain do you get after chip tuning the Hyundai Accent / Verna 1.6 DPI 122 hp?
Stage 1 for the Hyundai Accent / Verna 1.6 DPI 122 hp adds +2 hp — power increases from 122 to 124 hp (+2%). Torque rises from 153 to 156 Nm (+3 Nm).
What does a Stage 1 remap of the Hyundai Accent / Verna 1.6 DPI 122 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai Accent / Verna with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +2 hp with no hardware changes.
What is the risk of Stage 1 on the Hyundai Accent / Verna 1.6 DPI 122 hp?
A remap of the Hyundai Accent / Verna 1.6 DPI 122 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Hyundai Accent / Verna 1.6 DPI 122 hp?
Stage 2 for the Hyundai Accent / Verna 1.6 DPI 122 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Hyundai Accent / Verna 1.6 DPI 122 hp use?
The Hyundai Accent / Verna 1.6 DPI 122 hp is fitted with the Kefico CPGPSH3.26.1 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Hyundai Accent / Verna remain valid after Stage 1?
After remapping the Hyundai Accent / Verna, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai Accent / Verna?
Reading and writing via OBD takes 25-30 minutes on the Hyundai Accent / Verna. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai Accent / Verna?
Before Stage 1 the original of the Hyundai Accent / Verna 1.6 DPI 122 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai Accent / Verna 1.6 DPI 122 hp cost?
The remap price for the Hyundai Accent / Verna 1.6 DPI 122 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.