Hyundai Accent / Verna 1.6 CRDI EU6 115 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Hyundai Accent / Verna 1.6 CRDI EU6 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Hyundai Accent / Verna 1.6 CRDI EU6 115 hp ECU
Hyundai Accent / Verna (2010 - RB/RC) 1.6 CRDI EU6 115 hp — mass-market diesel engine of the passenger segment of the Hyundai Motor Group group (Корея, 1967). Stage 1 chip tuning raises power from 115 to 150 hp (+35 hp, +30%) and torque from 260 to 320 Nm (+60 Nm). ECU — Bosch EDC17C57. Flashing method: OBD or Bench depending on the unit's protection. The 2010 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The Hyundai range covers compacts, saloons, crossovers, SUVs and commercial vehicles (HD). The Hyundai diesel range is shared with Kia and Genesis within the group.
The Hyundai community in Eastern Europe has a large pool of ready-made Stage files. Stage 1 on a mid-range Hyundai CRDi delivers a noticeable torque gain. On older-generation Hyundais, Stage 1 goes in over OBD without Bench. Mid-range Hyundai engines are a mainstream chip tuning subject in Eastern Europe. The Hyundai community has a large pool of ready-made Stage files for CRDi and T-GDI engines.
Frequently asked questions
What power gain do you get after chip tuning the Hyundai Accent / Verna 1.6 CRDI EU6 115 hp?
After Stage 1 the power of the Hyundai Accent / Verna 1.6 CRDI EU6 115 hp rises from 115 to 150 hp, a gain of 35 hp (+30%). Torque rises from 260 to 320 Nm (+60 Nm).
How does Stage 1 differ from stock on the Hyundai Accent / Verna?
Stage 1 is a software optimization of the factory ECU firmware of the Hyundai Accent / Verna with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the Hyundai Accent / Verna 1.6 CRDI EU6 115 hp?
A remap of the Hyundai Accent / Verna 1.6 CRDI EU6 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Hyundai Accent / Verna 1.6 CRDI EU6 115 hp?
Stage 2 on the Hyundai Accent / Verna 1.6 CRDI EU6 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Hyundai Accent / Verna 1.6 CRDI EU6 115 hp use?
The Hyundai Accent / Verna 1.6 CRDI EU6 115 hp is fitted with the Bosch EDC17C57 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Hyundai Accent / Verna remain valid after Stage 1?
After remapping the Hyundai Accent / Verna, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Hyundai Accent / Verna?
Reading and writing via OBD takes 25-30 minutes on the Hyundai Accent / Verna. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Hyundai Accent / Verna?
Before Stage 1 the original of the Hyundai Accent / Verna 1.6 CRDI EU6 115 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Hyundai Accent / Verna 1.6 CRDI EU6 115 hp cost?
The remap price for the Hyundai Accent / Verna 1.6 CRDI EU6 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.