Ford S-MAX 2.0 TDCI EU5 163 hp — Stage 1 file (+22 hp)
hp
Stage 1 file for Ford S-MAX 2.0 TDCI EU5 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Ford S-MAX 2.0 TDCI EU5 163 hp ECU
Ford S-MAX (2009) 2.0 TDCI EU5 163 hp — mass-market diesel engine of the passenger segment of the Ford Motor Company group (США, 1903). Stage 1 chip tuning raises power from 163 to 185 hp (+22 hp, +13%) and torque from 340 to 420 Nm (+80 Nm). ECU — Delphi DCM3.5. Flashing method: OBD or Bench depending on the unit's protection. The 2009 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Ford is an American carmaker, founded in 1903 by Henry Ford. Ford shares some ECUs with Mazda (a Visteon legacy). The F-Series (F-150) is the best-selling pickup in the US. Mid-range Ford diesels are a mainstream chip tuning subject in Europe.
The US Ford community has a large pool of ready-made Stage files for EcoBoost and V8 engines. Stage 1 on TDCi/Transit engines delivers a noticeable torque gain. Cobb Tuning and SCT Tuning are the leading tuning brands for Ford in the US. Mid-range Ford models with EcoBoost are a mainstream chip tuning subject. The Ford Transit and Ranger are Ford's best-selling commercial diesels in Europe.
Frequently asked questions
How much does the power of the Ford S-MAX 2.0 TDCI EU5 163 hp increase after Stage 1?
After Stage 1 the power of the Ford S-MAX 2.0 TDCI EU5 163 hp rises from 163 to 185 hp, a gain of 22 hp (+13%). Torque rises from 340 to 420 Nm (+80 Nm).
How does Stage 1 differ from stock on the Ford S-MAX?
Stage 1 on the Ford S-MAX 2.0 TDCI EU5 163 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +22 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 TDCI EU5 163 hp?
Stage 1 on the Ford S-MAX 2.0 TDCI EU5 163 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Ford S-MAX 2.0 TDCI EU5 163 hp?
Stage 2 on the Ford S-MAX 2.0 TDCI EU5 163 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Ford S-MAX 2.0 TDCI EU5 163 hp run?
The control unit of the Ford S-MAX 2.0 TDCI EU5 163 hp is the Delphi DCM3.5. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Ford S-MAX?
Stage 1 on the Ford S-MAX voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Ford S-MAX 2.0 TDCI EU5 163 hp done?
The full remap cycle for the Ford S-MAX — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Ford S-MAX?
The original Ford S-MAX ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Ford S-MAX 2.0 TDCI EU5 163 hp?
The cost of Stage 1 for the Ford S-MAX 2.0 TDCI EU5 163 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.