Fiat Freemont 2.0 JTDm 170 hp — Stage 1 file (+30 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Fiat Freemont 2.0 JTDm 170 hp ECU

Fiat Freemont (2011) 2.0 JTDm 170 hp — mass-market diesel engine of the passenger segment of the Stellantis (бывш. FCA — Fiat Chrysler Automobiles) group (Италия, 1899). Stage 1 chip tuning raises power from 170 to 200 hp (+30 hp, +18%) and torque from 350 to 415 Nm (+65 Nm). This engine ships with different ECU variants: Bosch EDC16C39 (K-Line), Bosch EDC17C49, Bosch EDC17C79. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 9HP48-948TE TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 4 configurations · 4 ECU variants. A diesel built in 2011 — the Tricore ECU era; OBD flash works on most production revisions.

Fiat sits alongside brands such as Abarth, Lancia and Alfa Romeo (via Stellantis). Fiat's diesel range is built mainly around MultiJet (Common Rail) technology.

Within Stellantis, ECUs are standardised across platforms, so some files work on Fiat/Citroen/Peugeot. The Fiat community in Italy offers a large pool of ready-made Stage files for compacts and the Ducato. On Fiat diesels, Stage 1 delivers a noticeable torque gain. The Fiat community in Southern Europe has a large pool of ready-made Stage files. Mid-range Fiat engines are a high-volume chip tuning subject.

Dualogic is Fiat's badge for its automated gearbox. On mainstream Fiat models the TCU rarely needs calibration below Stage 1+. Fiat uses Aisin automatics and its own automated gearboxes.

Frequently asked questions

How much does the power of the Fiat Freemont 2.0 JTDm 170 hp increase after Stage 1?

Stage 1 chip tuning on the Fiat Freemont 2.0 JTDm 170 hp boosts engine output by 30 hp: from 170 to 200 hp. Torque rises from 350 to 415 Nm (+65 Nm).

What changes in the Fiat Freemont ECU after Stage 1?

Stage 1 is a software optimization of the factory ECU firmware of the Fiat Freemont with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +30 hp with no hardware changes.

What is the risk of Stage 1 on the Fiat Freemont 2.0 JTDm 170 hp?

A remap of the Fiat Freemont 2.0 JTDm 170 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.

What is Stage 2 for the Fiat Freemont 2.0 JTDm 170 hp?

Stage 2 for the Fiat Freemont 2.0 JTDm 170 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.

Which control units is the Fiat Freemont 2.0 JTDm 170 hp built with?

The Fiat Freemont 2.0 JTDm 170 hp comes with 3 ECU variants: Bosch EDC16C39 (K-Line), Bosch EDC17C49, Bosch EDC17C79. Calibration is done for the specific unit after the revision is identified.

What does remapping the ZF 9HP48-948TE gearbox give on the Fiat Freemont 2.0 JTDm 170 hp?

The ZF 9HP48-948TE TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.

Does the factory warranty of the Fiat Freemont remain valid after Stage 1?

After remapping the Fiat Freemont, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.

How long is the wait for a Stage 1 remap for the Fiat Freemont?

Reading and writing via OBD takes 25-30 minutes on the Fiat Freemont. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.

How do you roll back to the factory firmware of the Fiat Freemont?

Before Stage 1 the original of the Fiat Freemont 2.0 JTDm 170 hp is read out and saved — returning to the factory state is possible at any time.

How much does chip tuning the Fiat Freemont 2.0 JTDm 170 hp cost?

The remap price for the Fiat Freemont 2.0 JTDm 170 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.

Last updated: 31.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno