DS 4 1.6 e-HDI 115 hp — Stage 1 file (+21 hp)
hp
Stage 1 file for DS 4 1.6 e-HDI 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for DS 4 1.6 e-HDI 115 hp ECU
DS 4 (2010) 1.6 e-HDI 115 hp — premium diesel engine of the passenger segment of the Stellantis group (Франция, 2014). Stage 1 chip tuning raises power from 115 to 136 hp (+21 hp, +18%) and torque from 270 to 300 Nm (+30 Nm). This engine ships with different ECU variants: Siemens/Continental SID807, Siemens/Continental SID807EVO. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2010 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
DS shares platforms and engines with Citroen, Peugeot and Opel within Stellantis. DS Automobiles is a French premium brand, spun off from Citroen in 2014. DS positions itself as the group's premium arm and a French rival to Audi and BMW. HDi and BlueHDi are Citroen's badges for direct-injection turbo diesels.
The Citroen community in France and Western Europe has a large pool of Stage files. Stage 1 on Citroen diesels delivers a noticeable torque gain. On older-generation Citroens, Stage 1 is flashed via OBD without a bench. Mid-range Citroen engines are a mainstream chip tuning subject in Europe. The French Citroen community has a large pool of ready-made Stage files.
Frequently asked questions
How many horsepower does the DS 4 1.6 e-HDI 115 hp reach after a remap?
After Stage 1 the power of the DS 4 1.6 e-HDI 115 hp rises from 115 to 136 hp, a gain of 21 hp (+18%). Torque rises from 270 to 300 Nm (+30 Nm).
How does Stage 1 differ from stock on the DS 4?
Stage 1 is a software optimization of the factory ECU firmware of the DS 4 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +21 hp with no hardware changes.
What is the risk of Stage 1 on the DS 4 1.6 e-HDI 115 hp?
A remap of the DS 4 1.6 e-HDI 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the DS 4 1.6 e-HDI 115 hp?
Stage 2 on the DS 4 1.6 e-HDI 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the DS 4 1.6 e-HDI 115 hp built with?
The DS 4 1.6 e-HDI 115 hp comes with 2 ECU variants: Siemens/Continental SID807, Siemens/Continental SID807EVO. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the DS 4 remain valid after Stage 1?
After remapping the DS 4, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the DS 4?
Reading and writing via OBD takes 25-30 minutes on the DS 4. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the DS 4?
Before Stage 1 the original of the DS 4 1.6 e-HDI 115 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the DS 4 1.6 e-HDI 115 hp cost?
The remap price for the DS 4 1.6 e-HDI 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.