Dodge Challenger 6.2 V8 Hellcat 717 hp — Stage 1 file (+22 hp)
hp
Stage 1 file for Dodge Challenger 6.2 V8 Hellcat 717 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Dodge Challenger 6.2 V8 Hellcat 717 hp ECU
Dodge Challenger (2008) 6.2 V8 Hellcat 717 hp — mass-market petrol engine of the passenger segment of the Stellantis group (США, 1925). Stage 1 chip tuning raises power from 717 to 739 hp (+22 hp, +3%) and torque from 881 to 912 Nm (+31 Nm). ECU — Siemens/Continental GPEC2A. Flashing method: OBD or Bench depending on the unit's protection. The ZF 8HP90 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2008 generation — old-era petrol ECUs (ME7/ME9/MED9/Simos) with easily readable memory.
Dodge specialises in muscle cars (Charger, Challenger) and SUVs (Durango). The Hemi V8 is Dodge's iconic muscle-car engine. The Hellcat and Demon are Dodge's top segment, with extreme power output. The Chrysler petrol range is mainly the Pentastar V6. The Hemi V8 is the proprietary Chrysler/Dodge engine for the top models. The top Hemi Hellcat offers significant potential with hardware.
HP Tuners is the leading tool for Chrysler/Dodge. The Hellcat confidently reaches Stage 2 with hardware. The US Chrysler community has a large pool of ready-made Stage files. Top Chrysler/Dodge Hellcat engines sit at the power ceiling of the American mass market.
Chrysler uses the ZF 8HP on its top models. The TCU rarely needs recalibration up to Stage 1+. Hellcat models use a reinforced ZF 8HP.
Frequently asked questions
How many horsepower does the Dodge Challenger 6.2 V8 Hellcat 717 hp reach after a remap?
After Stage 1 the power of the Dodge Challenger 6.2 V8 Hellcat 717 hp rises from 717 to 739 hp, a gain of 22 hp (+3%). Torque rises from 881 to 912 Nm (+31 Nm).
How does Stage 1 differ from stock on the Dodge Challenger?
Stage 1 on the Dodge Challenger 6.2 V8 Hellcat 717 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +22 hp with no hardware changes.
What does Stage 1 give on the top-spec Dodge Challenger 6.2 V8 Hellcat 717 hp?
Stage 1 for the Dodge Challenger 6.2 V8 Hellcat 717 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How does Stage 2 differ from Stage 1 on the Dodge Challenger 6.2 V8 Hellcat 717 hp?
Stage 2 on the Dodge Challenger 6.2 V8 Hellcat 717 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Dodge Challenger 6.2 V8 Hellcat 717 hp run?
The control unit of the Dodge Challenger 6.2 V8 Hellcat 717 hp is the Siemens/Continental GPEC2A. Before flashing, the engineer identifies the exact revision and selects the write method.
Does the ZF 8HP90 transmission need calibration after Stage 1 on the Dodge Challenger?
Remapping the ZF 8HP90 gearbox is essential to fully unlock Stage 1 on the Dodge Challenger 6.2 V8 Hellcat 717 hp. Without a TCU update the factory torque cap will choke the torque gain and shifts will become noticeably softer.
Does Stage 1 void the warranty on the Dodge Challenger?
Stage 1 on the Dodge Challenger voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Dodge Challenger 6.2 V8 Hellcat 717 hp done?
The full remap cycle for the Dodge Challenger — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Dodge Challenger?
The original Dodge Challenger ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Dodge Challenger 6.2 V8 Hellcat 717 hp?
The cost of Stage 1 for the Dodge Challenger 6.2 V8 Hellcat 717 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.