Deutz 7 Series 7210 TTV 205hp (151kW) 806Nm — Stage 1 file (+41 hp)
hp
Stage 1 file for Deutz 7 Series 7210 TTV 205hp (151kW) 806Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz 7 Series 7210 TTV 205hp (151kW) 806Nm ECU
Deutz 7 Series (I) 7210 TTV 205hp (151kW) 806Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 205 to 246 hp (+41 hp, +20%) and torque from 806 to 894 Nm (+88 Nm).
Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Deutz engines are used across a wide range of agricultural and special machinery. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Deutz — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How many horsepower does the Deutz 7 Series 7210 TTV 205hp (151kW) 806Nm reach after a remap?
Stage 1 for the Deutz 7 Series 7210 TTV 205hp (151kW) 806Nm adds +41 hp — power increases from 205 to 246 hp (+20%). Torque rises from 806 to 894 Nm (+88 Nm).
What does a Stage 1 remap of the Deutz 7 Series 7210 TTV 205hp (151kW) 806Nm include?
Stage 1 is a software optimization of the factory ECU firmware of the Deutz 7 Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +41 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Deutz 7 Series?
Stage 1 on the powerful Deutz 7 Series 7210 TTV 205hp (151kW) 806Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
What is Stage 2 for the Deutz 7 Series 7210 TTV 205hp (151kW) 806Nm?
Stage 2 for the Deutz 7 Series 7210 TTV 205hp (151kW) 806Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Deutz 7 Series remain valid after Stage 1?
After remapping the Deutz 7 Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Deutz 7 Series?
Reading and writing via OBD takes 25-30 minutes on the Deutz 7 Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Deutz 7 Series?
Before Stage 1 the original of the Deutz 7 Series 7210 TTV 205hp (151kW) 806Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Deutz 7 Series 7210 TTV 205hp (151kW) 806Nm cost?
The remap price for the Deutz 7 Series 7210 TTV 205hp (151kW) 806Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.