Deutz 7 Series 7250 TTV 238hp (175kW) 934Nm — Stage 1 file (+48 hp)
hp
Stage 1 file for Deutz 7 Series 7250 TTV 238hp (175kW) 934Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Deutz 7 Series 7250 TTV 238hp (175kW) 934Nm ECU
Deutz 7 Series (I) 7250 TTV 238hp (175kW) 934Nm — agricultural diesel engine of the agricultural segment of the Deutz AG group (Германия, 1864). Stage 1 chip tuning raises power from 238 to 286 hp (+48 hp, +20%) and torque from 934 to 1095 Nm (+161 Nm).
Deutz is a German diesel engine manufacturer, founded in 1864. Deutz is the oldest internal-combustion engine manufacturer in the world. Deutz engines are used across a wide range of agricultural and special machinery. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Deutz — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How many horsepower does the Deutz 7 Series 7250 TTV 238hp (175kW) 934Nm reach after a remap?
After Stage 1 the power of the Deutz 7 Series 7250 TTV 238hp (175kW) 934Nm rises from 238 to 286 hp, a gain of 48 hp (+20%). Torque rises from 934 to 1095 Nm (+161 Nm).
How does Stage 1 differ from stock on the Deutz 7 Series?
Stage 1 is a software optimization of the factory ECU firmware of the Deutz 7 Series with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +48 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Deutz 7 Series?
The high-output Deutz 7 Series 7250 TTV 238hp (175kW) 934Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Deutz 7 Series 7250 TTV 238hp (175kW) 934Nm?
Stage 2 on the Deutz 7 Series 7250 TTV 238hp (175kW) 934Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Deutz 7 Series remain valid after Stage 1?
After remapping the Deutz 7 Series, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Deutz 7 Series?
Reading and writing via OBD takes 25-30 minutes on the Deutz 7 Series. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Deutz 7 Series?
Before Stage 1 the original of the Deutz 7 Series 7250 TTV 238hp (175kW) 934Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Deutz 7 Series 7250 TTV 238hp (175kW) 934Nm cost?
The remap price for the Deutz 7 Series 7250 TTV 238hp (175kW) 934Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.