Dacia Duster 1.5 DCI EU6 110 hp — Stage 1 file (+25 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Dacia Duster 1.5 DCI EU6 110 hp ECU

Dacia Duster (2018 - II) 1.5 DCI EU6 110 hp — mass-market diesel engine of the passenger segment of the Renault-Nissan-Mitsubishi Alliance (через Renault) group (Румыния, 1966). Stage 1 chip tuning raises power from 110 to 135 hp (+25 hp, +23%) and torque from 260 to 300 Nm (+40 Nm). This engine ships with different ECU variants: Bosch EDC17C42, Bosch EDC17C84, Siemens/Continental SID309, Siemens/Continental SID310. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 14 configurations · 4 ECU variants. A 2018 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.

Dacia is a Romanian carmaker, founded in 1966 and owned by Renault since 1999. Dacia uses Renault engines and platforms. Dacia positions itself as an affordable alternative to Renault — the same quality at a lower price. Mid-range Dacia diesels are a mainstream Stage 1 subject. Dacia diesels are a mainstream chip tuning subject across Eastern Europe and the CIS. DPF/SCR with AdBlue is standard on Euro-6 Dacia diesels.

Within the Renault-Nissan Alliance, ECUs are standardised, so Dacia files often work on Renault. On the Dacia dCi, Stage 1 delivers a noticeable torque gain. The Dacia community in Eastern Europe and the CIS enjoys a large library of ready-made Stage files. Mid-range Dacias are a high-volume chip tuning subject in Eastern Europe.

Frequently asked questions

How much horsepower does Stage 1 add for the Dacia Duster 1.5 DCI EU6 110 hp?

Stage 1 for the Dacia Duster 1.5 DCI EU6 110 hp adds +25 hp — power increases from 110 to 135 hp (+23%). Torque rises from 260 to 300 Nm (+40 Nm).

What does a Stage 1 remap of the Dacia Duster 1.5 DCI EU6 110 hp include?

Stage 1 on the Dacia Duster 1.5 DCI EU6 110 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +25 hp with no hardware changes.

Is a Stage 1 remap safe for the 1.5 DCI EU6 110 hp?

Stage 1 on the Dacia Duster 1.5 DCI EU6 110 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.

How does Stage 2 differ from Stage 1 on the Dacia Duster 1.5 DCI EU6 110 hp?

Stage 2 for the Dacia Duster 1.5 DCI EU6 110 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.

How many ECU variants does the Dacia Duster 1.5 DCI EU6 110 hp have?

The Dacia Duster 1.5 DCI EU6 110 hp has 4 ECU variants: Bosch EDC17C42, Bosch EDC17C84, Siemens/Continental SID309, Siemens/Continental SID310. Before flashing you need to read the specific unit — calibration is done for the exact hardware/software.

Does Stage 1 void the warranty on the Dacia Duster?

Stage 1 on the Dacia Duster voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Dacia Duster 1.5 DCI EU6 110 hp done?

The full remap cycle for the Dacia Duster — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Dacia Duster?

The original Dacia Duster ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Dacia Duster 1.5 DCI EU6 110 hp?

The cost of Stage 1 for the Dacia Duster 1.5 DCI EU6 110 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 01.09.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno