Cupra Leon 1.5 TSI eHybrid 272 hp — Stage 1 file (+28 hp)
hp
Stage 1 file for Cupra Leon 1.5 TSI eHybrid 272 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Cupra Leon 1.5 TSI eHybrid 272 hp ECU
Cupra Leon (2024) 1.5 TSI eHybrid 272 hp — sports hybrid engine of the passenger segment of the Volkswagen Group (VAG) — спортивный отдельный бренд от Seat group (Испания, 2018). Stage 1 chip tuning raises power from 272 to 300 hp (+28 hp, +10%) and torque from 350 to 400 Nm (+50 Nm).
Cupra is a Spanish performance brand, spun off from Seat in 2018. Cupra is part of the Volkswagen Group (VAG). Cupra positions itself as VAG's premium-sports sub-brand, sitting between Seat and Audi. Cupra PHEV variants combine a TSI engine with an electric motor. The Cupra Tavascan is a premium electric SUV. The Cupra Born is the flagship electric crossover on the MEB platform.
Protection on modern Cupra models is tight, so Bench is required. The Cupra community benefits from a large library of ready-made Stage files drawn from the shared VAG pool. Within the VAG group, ECUs are standardised, so Cupra files often work on VW/Audi/Seat. High-output Cupra models run a high-output platform with solid headroom for Stage 1. Cupra specialises in sporty turbocharged engines.
Frequently asked questions
How much horsepower does Stage 1 add for the Cupra Leon 1.5 TSI eHybrid 272 hp?
The Stage 1 gain for the Cupra Leon 1.5 TSI eHybrid 272 hp is 28 hp (+10%) over the stock 272 hp, for a total of 300 hp. Torque rises from 350 to 400 Nm (+50 Nm).
What is Stage 1 chip tuning for the Cupra Leon?
Stage 1 is a software optimization of the factory ECU firmware of the Cupra Leon with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +28 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Cupra Leon?
The high-output Cupra Leon 1.5 TSI eHybrid 272 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Cupra Leon 1.5 TSI eHybrid 272 hp?
Stage 2 on the Cupra Leon 1.5 TSI eHybrid 272 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Cupra Leon remain valid after Stage 1?
After remapping the Cupra Leon, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Cupra Leon?
Reading and writing via OBD takes 25-30 minutes on the Cupra Leon. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Cupra Leon?
Before Stage 1 the original of the Cupra Leon 1.5 TSI eHybrid 272 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Cupra Leon 1.5 TSI eHybrid 272 hp cost?
The remap price for the Cupra Leon 1.5 TSI eHybrid 272 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.