Cupra Leon 1.5 TSI eHybrid 204 hp — Stage 1 file (+96 hp)
Chip tuning for Cupra Leon 1.5 TSI eHybrid 204 hp ECU
Cupra Leon (2024) 1.5 TSI eHybrid 204 hp — sports hybrid engine of the passenger segment of the Volkswagen Group (VAG) — спортивный отдельный бренд от Seat group (Испания, 2018). Stage 1 chip tuning raises power from 204 to 300 hp (+96 hp, +47%) and torque from 350 to 400 Nm (+50 Nm).
The Cupra Born is the first fully electric Cupra, built on the MEB platform. Cupra is a Spanish performance brand, spun off from Seat in 2018. Cupra is part of the Volkswagen Group (VAG). On PHEV Cupra models, the ICE side is tuned just like a pure combustion engine. Cupra PHEV variants combine a TSI engine with an electric motor. The Cupra Tavascan is a premium electric SUV.
Within the VAG group, ECUs are standardised, so Cupra files often work on VW/Audi/Seat. Protection on modern Cupra models is tight, so Bench is required. The Cupra community benefits from a large library of ready-made Stage files drawn from the shared VAG pool. Cupra specialises in sporty turbocharged engines. High-output Cupra models run a high-output platform with solid headroom for Stage 1.
Frequently asked questions
How much does the power of the Cupra Leon 1.5 TSI eHybrid 204 hp increase after Stage 1?
Stage 1 for the Cupra Leon 1.5 TSI eHybrid 204 hp adds +96 hp — power increases from 204 to 300 hp (+47%). Torque rises from 350 to 400 Nm (+50 Nm).
What does a Stage 1 remap of the Cupra Leon 1.5 TSI eHybrid 204 hp include?
Stage 1 on the Cupra Leon 1.5 TSI eHybrid 204 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +96 hp with no hardware changes.
What does Stage 1 give on the powerful Cupra Leon 1.5 TSI eHybrid 204 hp?
Stage 1 on the powerful Cupra Leon 1.5 TSI eHybrid 204 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Cupra Leon 1.5 TSI eHybrid 204 hp?
Stage 2 for the Cupra Leon 1.5 TSI eHybrid 204 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Cupra Leon?
Stage 1 on the Cupra Leon voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Cupra Leon 1.5 TSI eHybrid 204 hp done?
The full remap cycle for the Cupra Leon — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Cupra Leon?
The original Cupra Leon ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Cupra Leon 1.5 TSI eHybrid 204 hp?
The cost of Stage 1 for the Cupra Leon 1.5 TSI eHybrid 204 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.