Cupra Leon 1.5 TSI 150 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Cupra Leon 1.5 TSI 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Cupra Leon 1.5 TSI 150 hp ECU
Cupra Leon (2024) 1.5 TSI 150 hp — sports petrol engine of the passenger segment of the Volkswagen Group (VAG) — спортивный отдельный бренд от Seat group (Испания, 2018). Stage 1 chip tuning raises power from 150 to 175 hp (+25 hp, +17%) and torque from 250 to 300 Nm (+50 Nm). ECU — Bosch MG1CS011. Flashing method: OBD or Bench depending on the unit's protection. TCU units on this engine: Temic DQ200 (MQB), Temic DQ200G2, Bosch DQ38x — each is calibrated with a separate file (torque limiter, shift maps for Stage 1). In the CHIPOK database: 4 configurations · 4 ECU variants. A 2024 petrol engine — the latest era of encrypted firmware; OBD access is available on production units, Bench on sport models.
Cupra is part of the Volkswagen Group (VAG). Cupra positions itself as VAG's premium-sports sub-brand, sitting between Seat and Audi. The Cupra range covers compacts, saloons, crossovers and EVs. Cupra shares ECUs and algorithms with Audi and Volkswagen. TSI is Cupra's petrol turbo engine designation, shared with VW and Audi. The factory Cupra calibration leans sporty, yet there is still headroom for Stage 1.
The Cupra community benefits from a large library of ready-made Stage files drawn from the shared VAG pool. Within the VAG group, ECUs are standardised, so Cupra files often work on VW/Audi/Seat. Protection on modern Cupra models is tight, so Bench is required. The MQB platform is the most refined chip tuning segment in Europe. Mid-range Cupras have a sport-oriented factory calibration and take Stage 1 with reliability fully preserved.
The DSG's TCU needs recalibration at Stage 1+. The DSG is Cupra's main dual-clutch gearbox.
Frequently asked questions
How many horsepower does the Cupra Leon 1.5 TSI 150 hp reach after a remap?
Stage 1 for the Cupra Leon 1.5 TSI 150 hp adds +25 hp — power increases from 150 to 175 hp (+17%). Torque rises from 250 to 300 Nm (+50 Nm).
What does a Stage 1 remap of the Cupra Leon 1.5 TSI 150 hp include?
Stage 1 chip tuning of the Cupra Leon is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +25 hp with no hardware changes.
Can you do Stage 1 on the Cupra Leon 1.5 TSI 150 hp?
Yes, Stage 1 for the Cupra Leon 1.5 TSI 150 hp stays within the factory limits for boost pressure, knock and temperature. On a healthy engine with a serviced turbo and injectors there is no risk.
How much does Stage 2 add on the Cupra Leon?
Stage 2 for the Cupra Leon 1.5 TSI 150 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which ECU is fitted to the Cupra Leon 1.5 TSI 150 hp?
The Cupra Leon 1.5 TSI 150 hp ECU is the Bosch MG1CS011. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
How many TCU units does the Cupra Leon 1.5 TSI 150 hp have?
The Cupra Leon 1.5 TSI 150 hp comes with 3 different automatic-transmission TCU units: Temic DQ200 (MQB), Temic DQ200G2, Bosch DQ38x. Each is calibrated with a separate file — torque limit, shift maps and launch control rpm for Stage 1.
What happens to the Cupra Leon warranty after chip tuning?
The factory warranty of the Cupra Leon does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Cupra Leon take?
On the Cupra Leon 1.5 TSI 150 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Cupra Leon?
Yes, the original ECU firmware of the Cupra Leon 1.5 TSI 150 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Cupra Leon?
Stage 1 for the Cupra Leon 1.5 TSI 150 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.