Cupra Leon 1.4 TSI e-HYBRID 245 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Cupra Leon 1.4 TSI e-HYBRID 245 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Cupra Leon 1.4 TSI e-HYBRID 245 hp ECU
Cupra Leon (2020) 1.4 TSI e-HYBRID 245 hp — sports hybrid engine of the passenger segment of the Volkswagen Group (VAG) — спортивный отдельный бренд от Seat group (Испания, 2018). Stage 1 chip tuning raises power from 245 to 270 hp (+25 hp, +10%) and torque from 400 to 450 Nm (+50 Nm).
Cupra is a Spanish performance brand, spun off from Seat in 2018. Cupra is part of the Volkswagen Group (VAG). Cupra positions itself as VAG's premium-sports sub-brand, sitting between Seat and Audi. The Cupra Born is the flagship electric crossover on the MEB platform. On PHEV Cupra models, the ICE side is tuned just like a pure combustion engine. Cupra PHEV variants combine a TSI engine with an electric motor.
Protection on modern Cupra models is tight, so Bench is required. The Cupra community benefits from a large library of ready-made Stage files drawn from the shared VAG pool. Within the VAG group, ECUs are standardised, so Cupra files often work on VW/Audi/Seat. High-output Cupra models run a high-output platform with solid headroom for Stage 1. Cupra specialises in sporty turbocharged engines.
Frequently asked questions
How much does the power of the Cupra Leon 1.4 TSI e-HYBRID 245 hp increase after Stage 1?
After Stage 1 the power of the Cupra Leon 1.4 TSI e-HYBRID 245 hp rises from 245 to 270 hp, a gain of 25 hp (+10%). Torque rises from 400 to 450 Nm (+50 Nm).
How does Stage 1 differ from stock on the Cupra Leon?
Stage 1 is a software optimization of the factory ECU firmware of the Cupra Leon with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Cupra Leon?
The high-output Cupra Leon 1.4 TSI e-HYBRID 245 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Cupra Leon 1.4 TSI e-HYBRID 245 hp?
Stage 2 on the Cupra Leon 1.4 TSI e-HYBRID 245 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Cupra Leon remain valid after Stage 1?
After remapping the Cupra Leon, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Cupra Leon?
Reading and writing via OBD takes 25-30 minutes on the Cupra Leon. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Cupra Leon?
Before Stage 1 the original of the Cupra Leon 1.4 TSI e-HYBRID 245 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Cupra Leon 1.4 TSI e-HYBRID 245 hp cost?
The remap price for the Cupra Leon 1.4 TSI e-HYBRID 245 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.