Claas Axion 950 8.7L 416hp (306kW) 1650Nm — Stage 1 file (+97 hp)
hp
Stage 1 file for Claas Axion 950 8.7L 416hp (306kW) 1650Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Claas Axion 950 8.7L 416hp (306kW) 1650Nm ECU
Claas Axion (I) 950 8.7L 416hp (306kW) 1650Nm — agricultural diesel engine of the agricultural segment of the Claas Group group (Германия, 1913). Stage 1 chip tuning raises power from 416 to 513 hp (+97 hp, +23%) and torque from 1650 to 2055 Nm (+405 Nm).
Claas is a German agricultural-machinery maker, founded in 1913. Claas is an independent family-owned company and a leader in combine harvesters. The Claas Lexion is the flagship combine harvester. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Топ агро-дизели — мощностной потолок сегмента.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Топ Claas — мощностной потолок агросегмента.
Frequently asked questions
How many horsepower does the Claas Axion 950 8.7L 416hp (306kW) 1650Nm reach after a remap?
Stage 1 for the Claas Axion 950 8.7L 416hp (306kW) 1650Nm adds +97 hp — power increases from 416 to 513 hp (+23%). Torque rises from 1650 to 2055 Nm (+405 Nm).
What does a Stage 1 remap of the Claas Axion 950 8.7L 416hp (306kW) 1650Nm include?
Stage 1 is a software optimization of the factory ECU firmware of the Claas Axion with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +97 hp with no hardware changes.
Does Stage 1 make sense on the Claas Axion 950 8.7L 416hp (306kW) 1650Nm with this much power?
On the top-spec Claas Axion 950 8.7L 416hp (306kW) 1650Nm engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Claas Axion 950 8.7L 416hp (306kW) 1650Nm?
Stage 2 for the Claas Axion 950 8.7L 416hp (306kW) 1650Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Claas Axion remain valid after Stage 1?
After remapping the Claas Axion, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Claas Axion?
Reading and writing via OBD takes 25-30 minutes on the Claas Axion. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Claas Axion?
Before Stage 1 the original of the Claas Axion 950 8.7L 416hp (306kW) 1650Nm is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Claas Axion 950 8.7L 416hp (306kW) 1650Nm cost?
The remap price for the Claas Axion 950 8.7L 416hp (306kW) 1650Nm is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.