Claas Axion 830 6.8 R6 196hp (144kW) 905Nm — Stage 1 file (+49 hp)
hp
Stage 1 file for Claas Axion 830 6.8 R6 196hp (144kW) 905Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Claas Axion 830 6.8 R6 196hp (144kW) 905Nm ECU
Claas Axion (I) 830 6.8 R6 196hp (144kW) 905Nm — agricultural diesel engine of the agricultural segment of the Claas Group group (Германия, 1913). Stage 1 chip tuning raises power from 196 to 245 hp (+49 hp, +25%) and torque from 905 to 1130 Nm (+225 Nm).
The Claas Lexion is the flagship combine harvester. Claas is a German agricultural-machinery maker, founded in 1913. Claas is an independent family-owned company and a leader in combine harvesters. Сельхозтехника — основной объект тюнинга в агросегменте; прирост момента критичен для тяговых работ. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Claas среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How much horsepower does Stage 1 add for the Claas Axion 830 6.8 R6 196hp (144kW) 905Nm?
The Stage 1 gain for the Claas Axion 830 6.8 R6 196hp (144kW) 905Nm is 49 hp (+25%) over the stock 196 hp, for a total of 245 hp. Torque rises from 905 to 1130 Nm (+225 Nm).
What is Stage 1 chip tuning for the Claas Axion?
Stage 1 on the Claas Axion 830 6.8 R6 196hp (144kW) 905Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +49 hp with no hardware changes.
Is a Stage 1 remap safe for the 830 6.8 R6 196hp (144kW) 905Nm?
Stage 1 on the Claas Axion 830 6.8 R6 196hp (144kW) 905Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Claas Axion 830 6.8 R6 196hp (144kW) 905Nm?
Stage 2 on the Claas Axion 830 6.8 R6 196hp (144kW) 905Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Claas Axion?
Stage 1 on the Claas Axion voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Claas Axion 830 6.8 R6 196hp (144kW) 905Nm done?
The full remap cycle for the Claas Axion — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Claas Axion?
The original Claas Axion ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Claas Axion 830 6.8 R6 196hp (144kW) 905Nm?
The cost of Stage 1 for the Claas Axion 830 6.8 R6 196hp (144kW) 905Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.