Claas Axion 930 8.7L 352hp (259kW) 1450Nm — Stage 1 file (+80 hp)
hp
Stage 1 file for Claas Axion 930 8.7L 352hp (259kW) 1450Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Claas Axion 930 8.7L 352hp (259kW) 1450Nm ECU
Claas Axion (I) 930 8.7L 352hp (259kW) 1450Nm — agricultural diesel engine of the agricultural segment of the Claas Group group (Германия, 1913). Stage 1 chip tuning raises power from 352 to 432 hp (+80 hp, +23%) and torque from 1450 to 1805 Nm (+355 Nm).
The Claas Lexion is the flagship combine harvester. Claas is a German agricultural-machinery maker, founded in 1913. Claas is an independent family-owned company and a leader in combine harvesters. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Топ агро-дизели — мощностной потолок сегмента.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Сельхозсегмент — расход и тяга важнее л.с. Топ Claas — мощностной потолок агросегмента.
Frequently asked questions
How many horsepower does the Claas Axion 930 8.7L 352hp (259kW) 1450Nm reach after a remap?
The Stage 1 gain for the Claas Axion 930 8.7L 352hp (259kW) 1450Nm is 80 hp (+23%) over the stock 352 hp, for a total of 432 hp. Torque rises from 1450 to 1805 Nm (+355 Nm).
What is Stage 1 chip tuning for the Claas Axion?
Stage 1 on the Claas Axion 930 8.7L 352hp (259kW) 1450Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +80 hp with no hardware changes.
What does Stage 1 give on the top-spec Claas Axion 930 8.7L 352hp (259kW) 1450Nm?
Stage 1 for the Claas Axion 930 8.7L 352hp (259kW) 1450Nm unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
How does Stage 2 differ from Stage 1 on the Claas Axion 930 8.7L 352hp (259kW) 1450Nm?
Stage 2 on the Claas Axion 930 8.7L 352hp (259kW) 1450Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does Stage 1 void the warranty on the Claas Axion?
Stage 1 on the Claas Axion voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Claas Axion 930 8.7L 352hp (259kW) 1450Nm done?
The full remap cycle for the Claas Axion — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Claas Axion?
The original Claas Axion ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Claas Axion 930 8.7L 352hp (259kW) 1450Nm?
The cost of Stage 1 for the Claas Axion 930 8.7L 352hp (259kW) 1450Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.