Claas Axion 850 6.8 R6 224hp (165kW) 1020Nm — Stage 1 file (+56 hp)
hp
Stage 1 file for Claas Axion 850 6.8 R6 224hp (165kW) 1020Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Claas Axion 850 6.8 R6 224hp (165kW) 1020Nm ECU
Claas Axion (I) 850 6.8 R6 224hp (165kW) 1020Nm — agricultural diesel engine of the agricultural segment of the Claas Group group (Германия, 1913). Stage 1 chip tuning raises power from 224 to 280 hp (+56 hp, +25%) and torque from 1020 to 1280 Nm (+260 Nm).
The Claas Lexion is the flagship combine harvester. Claas is a German agricultural-machinery maker, founded in 1913. Claas is an independent family-owned company and a leader in combine harvesters. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Высокомощные агро-дизели — флагманские тракторы и комбайны. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Claas — флагманские тракторы и комбайны с уверенным запасом под Stage 1.
Frequently asked questions
How much does the power of the Claas Axion 850 6.8 R6 224hp (165kW) 1020Nm increase after Stage 1?
Stage 1 for the Claas Axion 850 6.8 R6 224hp (165kW) 1020Nm adds +56 hp — power increases from 224 to 280 hp (+25%). Torque rises from 1020 to 1280 Nm (+260 Nm).
What does a Stage 1 remap of the Claas Axion 850 6.8 R6 224hp (165kW) 1020Nm include?
Stage 1 on the Claas Axion 850 6.8 R6 224hp (165kW) 1020Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +56 hp with no hardware changes.
What does Stage 1 give on the powerful Claas Axion 850 6.8 R6 224hp (165kW) 1020Nm?
Stage 1 on the powerful Claas Axion 850 6.8 R6 224hp (165kW) 1020Nm “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).
How does Stage 2 differ from Stage 1 on the Claas Axion 850 6.8 R6 224hp (165kW) 1020Nm?
Stage 2 for the Claas Axion 850 6.8 R6 224hp (165kW) 1020Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Claas Axion?
Stage 1 on the Claas Axion voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Claas Axion 850 6.8 R6 224hp (165kW) 1020Nm done?
The full remap cycle for the Claas Axion — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Claas Axion?
The original Claas Axion ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Claas Axion 850 6.8 R6 224hp (165kW) 1020Nm?
The cost of Stage 1 for the Claas Axion 850 6.8 R6 224hp (165kW) 1020Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.