Claas Axion 810 6.8 R6 163hp (120kW) 792Nm — Stage 1 file (+41 hp)
hp
Stage 1 file for Claas Axion 810 6.8 R6 163hp (120kW) 792Nm
Target +0 hp. Custom development for your engine.
Chip tuning for Claas Axion 810 6.8 R6 163hp (120kW) 792Nm ECU
Claas Axion (I) 810 6.8 R6 163hp (120kW) 792Nm — agricultural diesel engine of the agricultural segment of the Claas Group group (Германия, 1913). Stage 1 chip tuning raises power from 163 to 204 hp (+41 hp, +25%) and torque from 792 to 980 Nm (+188 Nm).
The Claas Lexion is the flagship combine harvester. Claas is a German agricultural-machinery maker, founded in 1913. Claas is an independent family-owned company and a leader in combine harvesters. Заводская калибровка сельхоз-дизелей консервативна — большой запас под Stage 1. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Агро-дизели среднего диапазона — массовый объект чип-тюнинга.
Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Stage 1 на агро-дизелях — заметный прирост момента для тяги. Сельхозсегмент — расход и тяга важнее л.с. Claas среднего класса — массовый объект чип-тюнинга в агросегменте.
Frequently asked questions
How many horsepower does the Claas Axion 810 6.8 R6 163hp (120kW) 792Nm reach after a remap?
Stage 1 for the Claas Axion 810 6.8 R6 163hp (120kW) 792Nm adds +41 hp — power increases from 163 to 204 hp (+25%). Torque rises from 792 to 980 Nm (+188 Nm).
What does a Stage 1 remap of the Claas Axion 810 6.8 R6 163hp (120kW) 792Nm include?
Stage 1 on the Claas Axion 810 6.8 R6 163hp (120kW) 792Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +41 hp with no hardware changes.
Is a Stage 1 remap safe for the 810 6.8 R6 163hp (120kW) 792Nm?
Stage 1 on the Claas Axion 810 6.8 R6 163hp (120kW) 792Nm is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Claas Axion 810 6.8 R6 163hp (120kW) 792Nm?
Stage 2 for the Claas Axion 810 6.8 R6 163hp (120kW) 792Nm is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Claas Axion?
Stage 1 on the Claas Axion voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Claas Axion 810 6.8 R6 163hp (120kW) 792Nm done?
The full remap cycle for the Claas Axion — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Claas Axion?
The original Claas Axion ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Claas Axion 810 6.8 R6 163hp (120kW) 792Nm?
The cost of Stage 1 for the Claas Axion 810 6.8 R6 163hp (120kW) 792Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.