Chevrolet Cruze 2.0 VCDI 150 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for Chevrolet Cruze 2.0 VCDI 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Chevrolet Cruze 2.0 VCDI 150 hp ECU
Chevrolet Cruze (2009) 2.0 VCDI 150 hp — mass-market diesel engine of the passenger segment of the General Motors group (США, 1911). Stage 1 chip tuning raises power from 150 to 185 hp (+35 hp, +23%) and torque from 320 to 400 Nm (+80 Nm). ECU — Bosch EDC16C39. Flashing method: OBD or Bench depending on the unit's protection. The 2009 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
The LS-series V8 is Chevrolet's iconic engine family (Camaro, Corvette). The Camaro and Corvette are Chevrolet's iconic muscle and sports cars. The Silverado is Chevrolet's flagship pickup. Duramax is the proprietary Chevrolet/GMC diesel range for pickups and trucks. DPF/SCR with AdBlue is standard on modern Duramax engines. Mid-range Chevrolet diesels are a mainstream chip tuning subject.
HP Tuners is the primary tool for Chevrolet/GM in the US. LS-swap is an industry of its own (Chevy LS engines into any car). The US Chevrolet community is the largest for Camaro, Corvette and LS-swaps. Mid-range Chevrolet models are a mainstream chip tuning subject.
Frequently asked questions
How much does the power of the Chevrolet Cruze 2.0 VCDI 150 hp increase after Stage 1?
After Stage 1 the power of the Chevrolet Cruze 2.0 VCDI 150 hp rises from 150 to 185 hp, a gain of 35 hp (+23%). Torque rises from 320 to 400 Nm (+80 Nm).
How does Stage 1 differ from stock on the Chevrolet Cruze?
Stage 1 on the Chevrolet Cruze 2.0 VCDI 150 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +35 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.0 VCDI 150 hp?
Stage 1 on the Chevrolet Cruze 2.0 VCDI 150 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Chevrolet Cruze 2.0 VCDI 150 hp?
Stage 2 on the Chevrolet Cruze 2.0 VCDI 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What control unit does the Chevrolet Cruze 2.0 VCDI 150 hp run?
The control unit of the Chevrolet Cruze 2.0 VCDI 150 hp is the Bosch EDC16C39. Before flashing, the engineer identifies the exact revision and selects the write method.
Does Stage 1 void the warranty on the Chevrolet Cruze?
Stage 1 on the Chevrolet Cruze voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Chevrolet Cruze 2.0 VCDI 150 hp done?
The full remap cycle for the Chevrolet Cruze — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Chevrolet Cruze?
The original Chevrolet Cruze ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Chevrolet Cruze 2.0 VCDI 150 hp?
The cost of Stage 1 for the Chevrolet Cruze 2.0 VCDI 150 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.