Chevrolet Camaro 6.2 V8 (ZL1) 659 hp — Stage 1 file (+31 hp)
hp
Stage 1 file for Chevrolet Camaro 6.2 V8 (ZL1) 659 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Chevrolet Camaro 6.2 V8 (ZL1) 659 hp ECU
Chevrolet Camaro (2016) 6.2 V8 (ZL1) 659 hp — mass-market petrol engine of the passenger segment of the General Motors group (США, 1911). Stage 1 chip tuning raises power from 659 to 690 hp (+31 hp, +5%) and torque from 881 to 900 Nm (+19 Nm). This engine ships with different ECU variants: Delco E92, Bosch T93. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2016 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Chevrolet is an American carmaker, founded in 1911 and part of General Motors since 1918. Chevrolet is GM's mass-market brand, focused on pickups, muscle cars and SUVs. The LS-series V8 is Chevrolet's iconic engine family (Camaro, Corvette). Camaro SS / ZL1 / Corvette offer significant potential with hardware. Corvette Z06 / ZR1 form a calibration segment of their own. The LS-series V8 is Chevrolet's iconic engine range dating from 1997.
The US Chevrolet community is the largest for Camaro, Corvette and LS-swaps. Camaro/Corvette confidently reach Stage 2 with hardware. LS-swap is an industry of its own (Chevy LS engines into any car). Top Chevrolet Corvette / Camaro ZL1 engines sit at the power ceiling of the American performance segment. HP Tuners is the leading tool for top Chevrolet models.
Frequently asked questions
How many horsepower does the Chevrolet Camaro 6.2 V8 (ZL1) 659 hp reach after a remap?
After Stage 1 the power of the Chevrolet Camaro 6.2 V8 (ZL1) 659 hp rises from 659 to 690 hp, a gain of 31 hp (+5%). Torque rises from 881 to 900 Nm (+19 Nm).
How does Stage 1 differ from stock on the Chevrolet Camaro?
Stage 1 is a software optimization of the factory ECU firmware of the Chevrolet Camaro with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +31 hp with no hardware changes.
Does Stage 1 make sense on the Chevrolet Camaro 6.2 V8 (ZL1) 659 hp with this much power?
Stage 1 for the Chevrolet Camaro 6.2 V8 (ZL1) 659 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the Chevrolet Camaro 6.2 V8 (ZL1) 659 hp?
Stage 2 on the Chevrolet Camaro 6.2 V8 (ZL1) 659 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Chevrolet Camaro 6.2 V8 (ZL1) 659 hp built with?
The Chevrolet Camaro 6.2 V8 (ZL1) 659 hp comes with 2 ECU variants: Delco E92, Bosch T93. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Chevrolet Camaro remain valid after Stage 1?
After remapping the Chevrolet Camaro, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Chevrolet Camaro?
Reading and writing via OBD takes 25-30 minutes on the Chevrolet Camaro. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Chevrolet Camaro?
Before Stage 1 the original of the Chevrolet Camaro 6.2 V8 (ZL1) 659 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Chevrolet Camaro 6.2 V8 (ZL1) 659 hp cost?
The remap price for the Chevrolet Camaro 6.2 V8 (ZL1) 659 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.