BMW 7-serie M60e 571 hp — Stage 1 file (+69 hp)
hp
Stage 1 file for BMW 7-serie M60e 571 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW 7-serie M60e 571 hp ECU
BMW 7-serie (2023 - G70) M60e 571 hp — premium hybrid engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 571 to 640 hp (+69 hp, +12%) and torque from 800 to 950 Nm (+150 Nm).
The BMW Group also includes Mini, Rolls-Royce and BMW Motorrad. On a PHEV, the ICE part is tuned just like the pure combustion variant. Full-EV BMWs keep the inverter and BMS locked, so traditional chip tuning does not apply. PHEV variants are available across most BMW series.
Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. The BMW community is renowned for active tuning and a large pool of available Stage files. Top BMW engines confidently reach Stage 2 with a downpipe + intake + intercooler. Bench reading is the standard procedure for top engines in modern models. Top BMW engines sit at the power ceiling, and the gain is significant. A well-known base once hardware is added (downpipe + intake + intercooler).
Frequently asked questions
How much does the power of the BMW 7-serie M60e 571 hp increase after Stage 1?
Stage 1 chip tuning on the BMW 7-serie M60e 571 hp boosts engine output by 69 hp: from 571 to 640 hp. Torque rises from 800 to 950 Nm (+150 Nm).
What changes in the BMW 7-serie ECU after Stage 1?
Stage 1 on the BMW 7-serie M60e 571 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +69 hp with no hardware changes.
What does Stage 1 give on the top-spec BMW 7-serie M60e 571 hp?
On the top-spec BMW 7-serie M60e 571 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
How does Stage 2 differ from Stage 1 on the BMW 7-serie M60e 571 hp?
Stage 2 for the BMW 7-serie M60e 571 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the BMW 7-serie?
Stage 1 on the BMW 7-serie voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the BMW 7-serie M60e 571 hp done?
The full remap cycle for the BMW 7-serie — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the BMW 7-serie?
The original BMW 7-serie ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the BMW 7-serie M60e 571 hp?
The cost of Stage 1 for the BMW 7-serie M60e 571 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.