BMW 4-serie 20d 190 hp — Stage 1 file (+35 hp)
hp
Stage 1 file for BMW 4-serie 20d 190 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW 4-serie 20d 190 hp ECU
BMW 4-serie (2013 - F32-F33-F36) 20d 190 hp — premium diesel engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 190 to 225 hp (+35 hp, +18%) and torque from 400 to 460 Nm (+60 Nm). This engine ships with different ECU variants: Bosch EDC17C41, Bosch EDC17C50, Bosch EDC17C56. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 4 configurations · 4 ECU variants. The 2013 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
The BMW Group also includes Mini, Rolls-Royce and BMW Motorrad. The factory calibration on BMW diesels is conservative, with significant headroom for Stage 1.
The BMW community is renowned for active tuning and a large pool of available Stage files. Stage 1 on mid-range BMW diesels delivers a noticeable torque gain. On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. Mid-range engines form the backbone of the range, and Stage 1 preserves engine life. The mainstream base is the most refined chip tuning segment in Europe. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes.
BMW's main gearbox is a modern multi-speed automatic. Mini and FWD compacts use a different TCU platform with its own tooling base. The TCU rarely needs recalibration up to Stage 1+, as the torque limiter usually copes with the Nm gain.
Frequently asked questions
How many horsepower does the BMW 4-serie 20d 190 hp reach after a remap?
After Stage 1 the power of the BMW 4-serie 20d 190 hp rises from 190 to 225 hp, a gain of 35 hp (+18%). Torque rises from 400 to 460 Nm (+60 Nm).
How does Stage 1 differ from stock on the BMW 4-serie?
Stage 1 is a software optimization of the factory ECU firmware of the BMW 4-serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +35 hp with no hardware changes.
What is the risk of Stage 1 on the BMW 4-serie 20d 190 hp?
A remap of the BMW 4-serie 20d 190 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the BMW 4-serie 20d 190 hp?
Stage 2 on the BMW 4-serie 20d 190 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the BMW 4-serie 20d 190 hp built with?
The BMW 4-serie 20d 190 hp comes with 3 ECU variants: Bosch EDC17C41, Bosch EDC17C50, Bosch EDC17C56. Calibration is done for the specific unit after the revision is identified.
What does remapping the ZF 8HPxx gearbox give on the BMW 4-serie 20d 190 hp?
The ZF 8HPxx TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the BMW 4-serie remain valid after Stage 1?
After remapping the BMW 4-serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the BMW 4-serie?
Reading and writing via OBD takes 25-30 minutes on the BMW 4-serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the BMW 4-serie?
Before Stage 1 the original of the BMW 4-serie 20d 190 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the BMW 4-serie 20d 190 hp cost?
The remap price for the BMW 4-serie 20d 190 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.