BMW 4-serie 20i 163 hp — Stage 1 file (+97 hp)
hp
Stage 1 file for BMW 4-serie 20i 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for BMW 4-serie 20i 163 hp ECU
BMW 4-serie (2013 - F32-F33-F36) 20i 163 hp — premium petrol engine of the passenger segment of the BMW Group (Mini, Rolls-Royce, BMW Motorrad) group (Германия, 1916). Stage 1 chip tuning raises power from 163 to 260 hp (+97 hp, +60%) and torque from 270 to 380 Nm (+110 Nm). This engine ships with different ECU variants: Bosch MEVD17.2.4, Bosch MEVD17.2.9. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. A petrol engine built in 2013 — a Tricore platform without strong protection; OBD access works.
M GmbH is BMW's performance division, building M engines since 1972. The factory calibration on BMW petrol engines is conservative, leaving headroom for Stage 1 without hardware changes. Mid-generation petrol models use standard OBD flash. Third-party flash platforms are an industry of their own for the BMW community.
Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. The BMW community is renowned for active tuning and a large pool of available Stage files. Stage 1 on standard mid-range BMW petrol engines delivers a noticeable gain with no hardware changes. Mid-range engines form the backbone of the range, and Stage 1 preserves engine life. The mainstream base is the most refined chip tuning segment in Europe. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes.
The gearbox comes in versions by torque class, so its tolerance depends on the engine. BMW's main gearbox is a modern multi-speed automatic. Mini and FWD compacts use a different TCU platform with its own tooling base.
Frequently asked questions
How much does the power of the BMW 4-serie 20i 163 hp increase after Stage 1?
Stage 1 chip tuning on the BMW 4-serie 20i 163 hp boosts engine output by 97 hp: from 163 to 260 hp. Torque rises from 270 to 380 Nm (+110 Nm).
What changes in the BMW 4-serie ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the BMW 4-serie with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +97 hp with no hardware changes.
What is the risk of Stage 1 on the BMW 4-serie 20i 163 hp?
A remap of the BMW 4-serie 20i 163 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the BMW 4-serie 20i 163 hp?
Stage 2 for the BMW 4-serie 20i 163 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Which control units is the BMW 4-serie 20i 163 hp built with?
The BMW 4-serie 20i 163 hp comes with 2 ECU variants: Bosch MEVD17.2.4, Bosch MEVD17.2.9. Calibration is done for the specific unit after the revision is identified.
What does remapping the ZF 8HPxx gearbox give on the BMW 4-serie 20i 163 hp?
The ZF 8HPxx TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the BMW 4-serie remain valid after Stage 1?
After remapping the BMW 4-serie, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the BMW 4-serie?
Reading and writing via OBD takes 25-30 minutes on the BMW 4-serie. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the BMW 4-serie?
Before Stage 1 the original of the BMW 4-serie 20i 163 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the BMW 4-serie 20i 163 hp cost?
The remap price for the BMW 4-serie 20i 163 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.