Audi RSQ3 2.5 TFSI 310 hp — Stage 1 file (+60 hp)
hp
Stage 1 file for Audi RSQ3 2.5 TFSI 310 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi RSQ3 2.5 TFSI 310 hp ECU
Audi RSQ3 (2013 - 8U) 2.5 TFSI 310 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 310 to 370 hp (+60 hp, +19%) and torque from 400 to 550 Nm (+150 Nm). ECU — Bosch MED17.1.1. Flashing method: OBD or Bench depending on the unit's protection. The Siemens/Continental DQ500 TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2013 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
The Audi community is one of the most active in Europe for chip tuning. The e-tron line is Audi's EV range within the VAG group. Audi is part of the Volkswagen Group (VAG), Europe's largest automotive group. The Audi community is one of the most open in Europe, with a large library of ready-made Stage files. The MQB and MLB platforms allow ECU commonality with Volkswagen, Porsche and Bentley. TFSI is Audi's signature designation for direct-injection petrol turbo engines.
The Audi community is renowned for its active tuning scene and a huge library of available Stage files. Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1.
The S tronic TCU requires calibration at Stage 1+, as the torque limiter usually sits below the engine's potential. Tiptronic is Audi's classic automatic for longitudinally mounted engines. S tronic is Audi's signature dual-clutch gearbox (the DSG in the Audi range).
Frequently asked questions
How many horsepower does the Audi RSQ3 2.5 TFSI 310 hp reach after a remap?
The Stage 1 gain for the Audi RSQ3 2.5 TFSI 310 hp is 60 hp (+19%) over the stock 310 hp, for a total of 370 hp. Torque rises from 400 to 550 Nm (+150 Nm).
What is Stage 1 chip tuning for the Audi RSQ3?
Stage 1 chip tuning of the Audi RSQ3 is a rework of the ECU maps: boost pressure, ignition advance, target lambda and the removal of factory torque limiters. The gain is +60 hp with no hardware changes.
Is Stage 1 safe on the high-output Audi RSQ3 2.5 TFSI 310 hp?
The high-output Audi RSQ3 2.5 TFSI 310 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
How much does Stage 2 add on the Audi RSQ3?
Stage 2 on the Audi RSQ3 2.5 TFSI 310 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which ECU is fitted to the Audi RSQ3 2.5 TFSI 310 hp?
The Audi RSQ3 2.5 TFSI 310 hp ECU is the Bosch MED17.1.1. Production versions support OBD access; locked variants require Bench (BDM/JTAG).
Is the Siemens/Continental DQ500 TCU calibrated together with Stage 1?
Yes, on the Audi RSQ3 2.5 TFSI 310 hp the Siemens/Continental DQ500 TCU is calibrated with a separate file. The torque limit, shift maps, launch control rpm and clutch torque map are changed. The factory torque limiter in the TCU is usually below what the engine can deliver after Stage 1.
What happens to the Audi RSQ3 warranty after chip tuning?
The factory warranty of the Audi RSQ3 does not remain valid after Stage 1 — the manufacturer withdraws its obligations once the ECU software is changed. CHIPOK provides its own warranty on its work and support.
How long does remapping the Audi RSQ3 take?
On the Audi RSQ3 2.5 TFSI 310 hp: OBD flash 25-30 minutes, Bench (if required) about an hour. The file processing itself takes 5-30 minutes once the original bin is received.
Is the original file kept when chip tuning the Audi RSQ3?
Yes, the original ECU firmware of the Audi RSQ3 2.5 TFSI 310 hp is kept and can be flashed back at any time. Returning to stock via OBD takes 25-30 minutes.
What is the price of a Stage 1 remap for the Audi RSQ3?
Stage 1 for the Audi RSQ3 2.5 TFSI 310 hp is paid for with CHIPOK credits (1 cr = 1 €). The final amount is set in the calculator, taking the extra options (off functions) into account.