Audi RSQ3 2.5 TFSI OPF (2021) 400 hp — Stage 1 file (+50 hp)
hp
Stage 1 file for Audi RSQ3 2.5 TFSI OPF (2021) 400 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi RSQ3 2.5 TFSI OPF (2021) 400 hp ECU
Audi RSQ3 (2019 - F3) 2.5 TFSI OPF (2021) 400 hp — premium petrol engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 400 to 450 hp (+50 hp, +12%) and torque from 500 to 550 Nm (+50 Nm). A modern petrol engine built in 2019 — a generation with encrypted ECU protection (Tricore TPROT); top engines require Bench.
Audi is part of the Volkswagen Group (VAG), Europe's largest automotive group. Audi Sport is Audi's performance division, building the RS models. Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. The Audi community is one of the most open in Europe, with a large library of ready-made Stage files. Modern Audi RS engines are more heavily encrypted than standard ones and usually require Bench. Audi RS models are the top of the Audi Sport range and direct rivals to Mercedes-AMG and BMW M.
APR and Revo are the leading tuning brands for Audi, right up to Stage 1+. On Audi, Stage 1 usually fits within the standard turnaround time. Protection on modern Audi RS models is the tightest in the group, so Bench is required. A Bench read is standard procedure on modern RS engines. RS engines are a proven base once supporting hardware is added (downpipe, intake and intercooler). Top-tier Audi Sport engines (RS models) sit at Audi's power ceiling; the gain is significant. APR and Revo are the leading tuning brands for top Audi engines.
Frequently asked questions
How much does the power of the Audi RSQ3 2.5 TFSI OPF (2021) 400 hp increase after Stage 1?
The Stage 1 gain for the Audi RSQ3 2.5 TFSI OPF (2021) 400 hp is 50 hp (+12%) over the stock 400 hp, for a total of 450 hp. Torque rises from 500 to 550 Nm (+50 Nm).
What is Stage 1 chip tuning for the Audi RSQ3?
Stage 1 is a software optimization of the factory ECU firmware of the Audi RSQ3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +50 hp with no hardware changes.
Does Stage 1 make sense on the Audi RSQ3 2.5 TFSI OPF (2021) 400 hp with this much power?
Stage 1 for the Audi RSQ3 2.5 TFSI OPF (2021) 400 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the Audi RSQ3 2.5 TFSI OPF (2021) 400 hp?
Stage 2 on the Audi RSQ3 2.5 TFSI OPF (2021) 400 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Audi RSQ3 remain valid after Stage 1?
After remapping the Audi RSQ3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi RSQ3?
Reading and writing via OBD takes 25-30 minutes on the Audi RSQ3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi RSQ3?
Before Stage 1 the original of the Audi RSQ3 2.5 TFSI OPF (2021) 400 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi RSQ3 2.5 TFSI OPF (2021) 400 hp cost?
The remap price for the Audi RSQ3 2.5 TFSI OPF (2021) 400 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.