Audi A4 30 TDI (2.0) 122 hp — Stage 1 file (+63 hp)
hp
Stage 1 file for Audi A4 30 TDI (2.0) 122 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A4 30 TDI (2.0) 122 hp ECU
Audi A4 (2018 - B9-FL) 30 TDI (2.0) 122 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 122 to 185 hp (+63 hp, +52%) and torque from 270 to 400 Nm (+130 Nm). ECU — Bosch EDC17C74. Flashing method: OBD or Bench depending on the unit's protection. In the CHIPOK database: 2 configurations. A 2018 diesel — a modern platform protected by RSA + checksum encryption; top models require BDM/JTAG.
Audi Sport is Audi's performance division, building the RS models. Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. Audi's signature slogan is “Vorsprung durch Technik” (Progress through Technology). On modern Audi diesels, the Tricore TPROT protection often requires a Bench read. The MQB platform lets a single calibration cover Audi/VW/Skoda/Seat. DPF/SCR with AdBlue is standard on all Euro-6 Audi diesels.
On mid-range Audi diesels, Stage 1 delivers a noticeable torque gain. Within the VAG group, ECUs are standardised, so a single file often fits a dozen models across Audi/VW/Skoda/Seat. On Audi, Stage 1 usually fits within the standard turnaround time. The MQB platform is the most refined chip tuning segment in Europe. Mid-range Audi engines form the backbone of the range; Stage 1 preserves engine life. In the mid segment, the Audi community is an open platform with a large library of ready-made Stage files. The factory calibration is conservative, with headroom for Stage 1 and no hardware changes.
Frequently asked questions
What is the Stage 1 effect on the Audi A4 30 TDI (2.0) 122 hp?
Stage 1 chip tuning on the Audi A4 30 TDI (2.0) 122 hp boosts engine output by 63 hp: from 122 to 185 hp. Torque rises from 270 to 400 Nm (+130 Nm).
What changes in the Audi A4 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Audi A4 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +63 hp with no hardware changes.
What is the risk of Stage 1 on the Audi A4 30 TDI (2.0) 122 hp?
A remap of the Audi A4 30 TDI (2.0) 122 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Audi A4 30 TDI (2.0) 122 hp?
Stage 2 for the Audi A4 30 TDI (2.0) 122 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
What ECU platform does the Audi A4 30 TDI (2.0) 122 hp use?
The Audi A4 30 TDI (2.0) 122 hp is fitted with the Bosch EDC17C74 ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Audi A4 remain valid after Stage 1?
After remapping the Audi A4, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi A4?
Reading and writing via OBD takes 25-30 minutes on the Audi A4. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi A4?
Before Stage 1 the original of the Audi A4 30 TDI (2.0) 122 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi A4 30 TDI (2.0) 122 hp cost?
The remap price for the Audi A4 30 TDI (2.0) 122 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.