Audi A4 3.0 TDI EU6 272 hp — Stage 1 file (+48 hp)
hp
Stage 1 file for Audi A4 3.0 TDI EU6 272 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Audi A4 3.0 TDI EU6 272 hp ECU
Audi A4 (2015 - B9) 3.0 TDI EU6 272 hp — premium diesel engine of the passenger segment of the Volkswagen Group (VAG) group (Германия, 1909). Stage 1 chip tuning raises power from 272 to 320 hp (+48 hp, +18%) and torque from 600 to 680 Nm (+80 Nm). This engine ships with different ECU variants: Bosch MD1, Bosch MD1CP004. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2015 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Audi is part of the Volkswagen Group (VAG), Europe's largest automotive group. Audi Sport is Audi's performance division, building the RS models. Audi shares platforms with Volkswagen, Porsche, Bentley and Lamborghini within VAG. The Audi diesel range is fully unified with Volkswagen, Skoda and Seat within VAG. Mid-generation diesel models allow standard OBD read/write within the MQB platform. The MQB platform lets a single calibration cover Audi/VW/Skoda/Seat.
On the Audi Q-series diesel SUVs, Stage 1 focuses on torque. High-output Audi engines sit in the premium segment, with solid headroom for Stage 1. Audi S models are the milder performance step between the standard cars and the RS range. The premium Audi segment runs a high-output platform with Stage 2 potential.
Frequently asked questions
How much does the power of the Audi A4 3.0 TDI EU6 272 hp increase after Stage 1?
After Stage 1 the power of the Audi A4 3.0 TDI EU6 272 hp rises from 272 to 320 hp, a gain of 48 hp (+18%). Torque rises from 600 to 680 Nm (+80 Nm).
How does Stage 1 differ from stock on the Audi A4?
Stage 1 is a software optimization of the factory ECU firmware of the Audi A4 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +48 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Audi A4?
The high-output Audi A4 3.0 TDI EU6 272 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Audi A4 3.0 TDI EU6 272 hp?
Stage 2 on the Audi A4 3.0 TDI EU6 272 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Audi A4 3.0 TDI EU6 272 hp built with?
The Audi A4 3.0 TDI EU6 272 hp comes with 2 ECU variants: Bosch MD1, Bosch MD1CP004. Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Audi A4 remain valid after Stage 1?
After remapping the Audi A4, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Audi A4?
Reading and writing via OBD takes 25-30 minutes on the Audi A4. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Audi A4?
Before Stage 1 the original of the Audi A4 3.0 TDI EU6 272 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Audi A4 3.0 TDI EU6 272 hp cost?
The remap price for the Audi A4 3.0 TDI EU6 272 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.