Alpina B3 3.0TT 410 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Alpina B3 3.0TT 410 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Alpina B3 3.0TT 410 hp ECU
Alpina B3 (2015) 3.0TT 410 hp — sports petrol engine of the passenger segment of the Alpina Burkard Bovensiepen (BMW Group с 2022) group (Германия, 1916). Stage 1 chip tuning raises power from 410 to 450 hp (+40 hp, +10%) and torque from 600 to 660 Nm (+60 Nm). This engine ships with different ECU variants: Bosch MEVD17.2.6, Bosch MEVD17.2.G. The flashing method is determined by the specific unit: OBD, Bench or Boot mode. The ZF 8HPxx TCU is calibrated with a separate file — torque limiter and shift maps for Stage 1. In the CHIPOK database: 3 configurations · 3 ECU variants. The 2015 generation — mid-generation petrol ECUs (MEDC17/MEVD17/Simos PCR), OBD flash on production revisions.
Alpina specialises in premium tuned versions of BMW (B5, B7, XB7, B8). Since 2022 Alpina has been part of the BMW Group. Alpina is a German BMW tuning brand, founded in 1965. Top M GmbH engines offer significant potential with a downpipe + intake.
On older and mid-generation BMWs, Stage 1 is flashed over OBD without Bench. Stage 1 on BMW usually stays within the standard timeframe, with no particular difficulty on the standard models. The BMW community is renowned for active tuning and a large pool of available Stage files. Top BMW engines sit at the power ceiling, and the gain is significant. A well-known base once hardware is added (downpipe + intake + intercooler). Bench reading is the standard procedure for top engines in modern models.
Top BMW models use a reinforced gearbox version that handles significant stock torque. Older BMW M models use a dual-clutch automated gearbox. BMW's main gearbox is a modern multi-speed automatic.
Frequently asked questions
How many horsepower does the Alpina B3 3.0TT 410 hp reach after a remap?
The Stage 1 gain for the Alpina B3 3.0TT 410 hp is 40 hp (+10%) over the stock 410 hp, for a total of 450 hp. Torque rises from 600 to 660 Nm (+60 Nm).
What is Stage 1 chip tuning for the Alpina B3?
Stage 1 is a software optimization of the factory ECU firmware of the Alpina B3 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +40 hp with no hardware changes.
Does Stage 1 make sense on the Alpina B3 3.0TT 410 hp with this much power?
Stage 1 for the Alpina B3 3.0TT 410 hp unlocks the potential built in by the factory but artificially capped to meet mass-market targets. A base of 750-800 hp is achievable once hardware is added.
What is Stage 2 for the Alpina B3 3.0TT 410 hp?
Stage 2 on the Alpina B3 3.0TT 410 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Alpina B3 3.0TT 410 hp built with?
The Alpina B3 3.0TT 410 hp comes with 2 ECU variants: Bosch MEVD17.2.6, Bosch MEVD17.2.G. Calibration is done for the specific unit after the revision is identified.
What does remapping the ZF 8HPxx gearbox give on the Alpina B3 3.0TT 410 hp?
The ZF 8HPxx TCU is calibrated separately: the torque limit is raised, the shift maps are optimized for the Stage 1 characteristics, and launch control is re-tuned. The TCU file is flashed separately from the ECU.
Does the factory warranty of the Alpina B3 remain valid after Stage 1?
After remapping the Alpina B3, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Alpina B3?
Reading and writing via OBD takes 25-30 minutes on the Alpina B3. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Alpina B3?
Before Stage 1 the original of the Alpina B3 3.0TT 410 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Alpina B3 3.0TT 410 hp cost?
The remap price for the Alpina B3 3.0TT 410 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.