Alfa Romeo CrossWagon 1.9 JTDm 150 hp — Stage 1 file (+40 hp)
hp
Stage 1 file for Alfa Romeo CrossWagon 1.9 JTDm 150 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Alfa Romeo CrossWagon 1.9 JTDm 150 hp ECU
Alfa Romeo CrossWagon (2002) 1.9 JTDm 150 hp — premium diesel engine of the passenger segment of the Stellantis group (Италия, 1910). Stage 1 chip tuning raises power from 150 to 190 hp (+40 hp, +27%) and torque from 305 to 375 Nm (+70 Nm). This engine ships with different ECU variants: Bosch EDC16C39 (CAN), Bosch EDC16C39 (K-Line). The flashing method is determined by the specific unit: OBD, Bench or Boot mode. In the CHIPOK database: 2 configurations · 2 ECU variants. The 2002 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Alfa Romeo is an Italian premium manufacturer from Milan, founded in 1910. Alfa Romeo is part of the Stellantis group (formerly FCA). Alfa Romeo specialises in premium saloons and sports cars with a strong focus on driver engagement. The factory calibration of Alfa diesels is conservative, leaving headroom for Stage 1. DPF/SCR with AdBlue is standard on all Euro-6 Alfa diesels. The Alfa Romeo diesel range is largely based on Stellantis MultiJet technology.
The Alfa Romeo community is a premium chip tuning niche in Italy and across Europe. On mid-range Alfa diesels, Stage 1 delivers a noticeable torque gain. Mid-range Alfa Romeos sit in the premium segment with solid headroom for Stage 1.
Frequently asked questions
How many horsepower does the Alfa Romeo CrossWagon 1.9 JTDm 150 hp reach after a remap?
The Stage 1 gain for the Alfa Romeo CrossWagon 1.9 JTDm 150 hp is 40 hp (+27%) over the stock 150 hp, for a total of 190 hp. Torque rises from 305 to 375 Nm (+70 Nm).
What is Stage 1 chip tuning for the Alfa Romeo CrossWagon?
Stage 1 is a software optimization of the factory ECU firmware of the Alfa Romeo CrossWagon with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +40 hp with no hardware changes.
What is the risk of Stage 1 on the Alfa Romeo CrossWagon 1.9 JTDm 150 hp?
A remap of the Alfa Romeo CrossWagon 1.9 JTDm 150 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Alfa Romeo CrossWagon 1.9 JTDm 150 hp?
Stage 2 on the Alfa Romeo CrossWagon 1.9 JTDm 150 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Which control units is the Alfa Romeo CrossWagon 1.9 JTDm 150 hp built with?
The Alfa Romeo CrossWagon 1.9 JTDm 150 hp comes with 2 ECU variants: Bosch EDC16C39 (CAN), Bosch EDC16C39 (K-Line). Calibration is done for the specific unit after the revision is identified.
Does the factory warranty of the Alfa Romeo CrossWagon remain valid after Stage 1?
After remapping the Alfa Romeo CrossWagon, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Alfa Romeo CrossWagon?
Reading and writing via OBD takes 25-30 minutes on the Alfa Romeo CrossWagon. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Alfa Romeo CrossWagon?
Before Stage 1 the original of the Alfa Romeo CrossWagon 1.9 JTDm 150 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Alfa Romeo CrossWagon 1.9 JTDm 150 hp cost?
The remap price for the Alfa Romeo CrossWagon 1.9 JTDm 150 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.