Alfa Romeo Brera 2.4 JTDm 210 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Alfa Romeo Brera 2.4 JTDm 210 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Alfa Romeo Brera 2.4 JTDm 210 hp ECU
Alfa Romeo Brera (2008) 2.4 JTDm 210 hp — premium diesel engine of the passenger segment of the Stellantis group (Италия, 1910). Stage 1 chip tuning raises power from 210 to 235 hp (+25 hp, +12%) and torque from 400 to 480 Nm (+80 Nm). ECU — Bosch EDC16C39 (K-Line). Flashing method: OBD or Bench depending on the unit's protection. The 2008 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Alfa Romeo is an Italian premium manufacturer from Milan, founded in 1910. Alfa Romeo is part of the Stellantis group (formerly FCA). Alfa Romeo specialises in premium saloons and sports cars with a strong focus on driver engagement. The factory calibration of Alfa diesels is conservative, leaving headroom for Stage 1. DPF/SCR with AdBlue is standard on all Euro-6 Alfa diesels. The Alfa Romeo diesel range is largely based on Stellantis MultiJet technology.
The Alfa Romeo community is a premium chip tuning niche in Italy and across Europe. High-output Alfa models sit in the Quadrifoglio segment, with genuine Stage 2 potential.
Frequently asked questions
How much does the power of the Alfa Romeo Brera 2.4 JTDm 210 hp increase after Stage 1?
The Stage 1 gain for the Alfa Romeo Brera 2.4 JTDm 210 hp is 25 hp (+12%) over the stock 210 hp, for a total of 235 hp. Torque rises from 400 to 480 Nm (+80 Nm).
What is Stage 1 chip tuning for the Alfa Romeo Brera?
Stage 1 is a software optimization of the factory ECU firmware of the Alfa Romeo Brera with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Alfa Romeo Brera?
The high-output Alfa Romeo Brera 2.4 JTDm 210 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Alfa Romeo Brera 2.4 JTDm 210 hp?
Stage 2 on the Alfa Romeo Brera 2.4 JTDm 210 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
What ECU platform does the Alfa Romeo Brera 2.4 JTDm 210 hp use?
The Alfa Romeo Brera 2.4 JTDm 210 hp is fitted with the Bosch EDC16C39 (K-Line) ECU. The read method depends on the unit's protection: OBD, Bench via BDM, or Boot mode.
Does the factory warranty of the Alfa Romeo Brera remain valid after Stage 1?
After remapping the Alfa Romeo Brera, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Alfa Romeo Brera?
Reading and writing via OBD takes 25-30 minutes on the Alfa Romeo Brera. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Alfa Romeo Brera?
Before Stage 1 the original of the Alfa Romeo Brera 2.4 JTDm 210 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Alfa Romeo Brera 2.4 JTDm 210 hp cost?
The remap price for the Alfa Romeo Brera 2.4 JTDm 210 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.