Continental SIMOS12.2 Immo Data: VAG (Audi · Volkswagen)
Immo Data on the Continental SIMOS12.2 on the TC1797 processor control unit for vehicles of the VAG group: Audi, Volkswagen. Upload the dump — free analysis and check; apply the operation and download the ready file in your portal account.
Reading VIN, PIN, keys and other immo parameters from an ECU dump — diagnostics and cross-checking without modifying the file.
| Operation | Immo Data |
|---|---|
| Control unit | Continental SIMOS12.2 |
| Car makes | VAG — Audi, Volkswagen |
| Processor (MCU) | TC1797 |
| Access / memory | INT FLASH [TC1797] · INT EEPROM [TC1797] |
| INT FLASH | TC1797 |
| INT EEPROM | TC1797 |
| Method | Online, from the ECU memory dump (.bin) |
| Applicability check | Free |
| Checksums | Recalculated automatically |
| Result | A ready file to write to the unit |
Continental SIMOS12.2 Immo Data — 14 vehicles
Operation Immo Data is supported for the Continental SIMOS12.2 block on vehicles of the VAG group (Audi, Volkswagen). In the list: Volkswagen Passat, Audi S3, Volkswagen Passat Variant, Volkswagen Beetle, Volkswagen Beetle Cabriolet, Volkswagen Jetta and 6 more variants. Upload the dump — the system detects the version and checks applicability for free.
| Make | Model | Version | Year |
|---|---|---|---|
| Volkswagen | Passat | 1.8 TSI 7AT | 2012 |
| Audi | S3 | 2.0 TFSI Quattro S-Tronic | 2013 |
| Volkswagen | Passat Variant | 1.8 TSI 7AT | 2012 |
| Volkswagen | Beetle | 2.0 TSI DSG 6AT | 2012 |
| Volkswagen | Beetle Cabriolet | 2.0 TSI DSG 6AT | 2012 |
| Volkswagen | Jetta | 2.0 TSI GLI 6MT | 2012 |
| Audi | S3 | 2.0 TFSI Quattro | 2013 |
| Volkswagen | Beetle | 2.0 TSI 6MT | 2012 |
| Volkswagen | Beetle Cabriolet | 2.0 TSI 6MT | 2012 |
| Volkswagen | Jetta | 2.0 TSI GLI 6AT | 2012 |
| Volkswagen | Passat | 1.8 TSI 6AT | 2010 |
| Volkswagen | Passat | 1.8 TSI 6MT | 2012 |
| Volkswagen | Passat Variant | 1.8 TSI 6MT | 2012 |
| Volkswagen | Passat Variant | 1.8 TSI 7AT | 2010 |
Continental SIMOS12.2 Immo Data — for VAG (Audi, Volkswagen)
Immo Data reads the immobiliser parameters straight from an ECU dump: VIN, PIN/SKC, ISN, immobiliser status and the identifiers of the linked modules. The file is not modified, so the operation is safe and suits diagnostics.
When you need Immo Data
- Buying a used unit — check which car the ECU is tied to before fitting it.
- Key programming — get the PIN/SKC or ISN that your programming tool needs.
- No-start diagnostics — find out whether it is really the immobiliser blocking the engine.
- Cross-checking the modules — make sure the VIN and identifiers match between the ECU and the cluster.
What you get: the immobiliser parameters of the unit are read and displayed — the dump stays untouched.
Continental SIMOS12.2 memory and reading
The Continental SIMOS12.2 unit uses on the TC1797 processor the following: INT FLASH — TC1797, INT EEPROM — TC1797. The Immo Data operation works on the INT FLASH [TC1797] · INT EEPROM [TC1797] area — that is the one to read out and upload. If OBD reading is not available for this unit, the dump is taken on the bench via Bench or Boot mode.
For the Continental SIMOS12.2 block on the TC1797 processor the «Immo Data» operation runs online from the ECU memory dump (access — INT FLASH [TC1797] · INT EEPROM [TC1797]). Read the file via OBD, Bench or Boot and upload it — the system detects Continental SIMOS12.2 and checks whether the operation applies for free. You'll get the ready file with recalculated checksums in your portal account.
Frequently asked questions
Immo Data on Continental SIMOS12.2 — short and to the point
What does Immo Data do on Continental SIMOS12.2?
Reading VIN, PIN, keys and other immo parameters from an ECU dump — diagnostics and cross-checking without modifying the file.
Which file should I upload?
The ECU memory dump (access INT FLASH [TC1797] · INT EEPROM [TC1797]), read via OBD, Bench or Boot. Upload the file — the system detects Continental SIMOS12.2 for free and checks whether the operation applies.
How much does Immo Data cost?
Uploading and analyzing the file is free. Applying the operation and downloading the ready file happen in your portal account (50 €).
Are the checksums recalculated?
Yes, automatically. The ready file is immediately writable to the unit — no need to recalculate checksums by hand.
Which vehicles is it for?
Continental SIMOS12.2 with the Immo Data operation covers VAG group vehicles (Audi, Volkswagen). The system detects the exact version from the uploaded dump.
What memory and processor does Continental SIMOS12.2 use?
The unit is built around the TC1797 processor. Memory of the unit: INT FLASH — TC1797, INT EEPROM — TC1797. The Immo Data operation needs INT FLASH [TC1797] · INT EEPROM [TC1797] access.