Bosch MEVD17.2.K ISN+VIN Edit: BMW Group (BMW · Mini)
ISN+VIN Edit on the Bosch MEVD17.2.K control unit for vehicles of the BMW Group group: BMW, Mini. Upload the dump — free analysis and check; apply the operation and download the ready file in your portal account.
Read and write ISN — syncing the ECU with CAS / EWS / FEM when replacing or repairing a unit.
| Operation | ISN+VIN Edit |
|---|---|
| Control unit | Bosch MEVD17.2.K |
| Car makes | BMW Group — BMW, Mini |
| Access / memory | INT FLASH [TC1793] · INT EEPROM [TC1793] |
| INT FLASH | TC1793 |
| INT EEPROM | TC1793 |
| Method | Online, from the ECU memory dump (.bin) |
| Applicability check | Free |
| Checksums | Recalculated automatically |
| Result | A ready file to write to the unit |
Bosch MEVD17.2.K ISN+VIN Edit — 17 vehicles
Operation ISN+VIN Edit is supported for the Bosch MEVD17.2.K block on vehicles of the BMW Group group (BMW, Mini). In the list: BMW 3-Series, Mini One, BMW 5-Series GT, BMW 1-Series, BMW X3, BMW X1, BMW X5, BMW X6 and 9 more variants. Upload the dump — the system detects the version and checks applicability for free.
| Make | Model | Version | Year |
|---|---|---|---|
| BMW | 3-Series | 335i xDrive 6MT | 2010 |
| Mini | One | 1.4 6MT | 2007 |
| BMW | 5-Series GT | 535i xDrive 8AT | 2013 |
| BMW | 1-Series | 135i 7AT | 2011 |
| BMW | X3 | xDrive35i 8AT | 2011 |
| BMW | X1 | xDrive35i 6AT | 2013 |
| BMW | X5 | xDrive35i 8AT | 2010 |
| BMW | X6 | xDrive35i 8AT | 2010 |
| BMW | 1-Series | 135i 6MT | 2011 |
| BMW | 3-Series | 335i 6AT | 2010 |
| BMW | 3-Series | 335i 6MT | 2010 |
| BMW | 3-Series | 335i 7AT | 2010 |
| BMW | 3-Series | 335i xDrive 6AT | 2010 |
| BMW | 5-Series GT | 535i 8AT | 2009 |
| BMW | 5-Series GT | 535i 8AT | 2013 |
| BMW | 5-Series GT | 535i xDrive 8AT | 2010 |
| BMW | X3 | xDrive35i 8AT | 2010 |
Bosch MEVD17.2.K ISN+VIN Edit — for BMW Group (BMW, Mini)
The ISN (Individual Serial Number) is a unique serial number by which the engine control unit syncs with BMW's security system: CAS, EWS or FEM/BDC. Without a matching ISN the unit won't start the engine.
When you need ISN+VIN Edit
- ECU replacement or repair — the new unit must pair with your car's CAS/FEM.
- Read ISN — read the serial number from the dump to match it with other units.
- Write ISN — write into the ECU a number matching the car's security system.
- Recovery after a failed write — restore the unit to working order.
What you get: the ISN in the unit matches the security system — the engine starts normally.
Bosch MEVD17.2.K memory and reading
The Bosch MEVD17.2.K unit uses the following: INT FLASH — TC1793, INT EEPROM — TC1793. The ISN+VIN Edit operation works on the INT FLASH [TC1793] · INT EEPROM [TC1793] area — that is the one to read out and upload. If OBD reading is not available for this unit, the dump is taken on the bench via Bench or Boot mode.
For the Bosch MEVD17.2.K block the «ISN+VIN Edit» operation runs online from the ECU memory dump (access — INT FLASH [TC1793] · INT EEPROM [TC1793]). Read the file via OBD, Bench or Boot and upload it — the system detects Bosch MEVD17.2.K and checks whether the operation applies for free. You'll get the ready file with recalculated checksums in your portal account.
Frequently asked questions
ISN+VIN Edit on Bosch MEVD17.2.K — short and to the point
What does ISN+VIN Edit do on Bosch MEVD17.2.K?
Read and write ISN — syncing the ECU with CAS / EWS / FEM when replacing or repairing a unit.
Which file should I upload?
The ECU memory dump (access INT FLASH [TC1793] · INT EEPROM [TC1793]), read via OBD, Bench or Boot. Upload the file — the system detects Bosch MEVD17.2.K for free and checks whether the operation applies.
How much does ISN+VIN Edit cost?
Uploading and analyzing the file is free. Applying the operation and downloading the ready file happen in your portal account (50 €).
Are the checksums recalculated?
Yes, automatically. The ready file is immediately writable to the unit — no need to recalculate checksums by hand.
Which vehicles is it for?
Bosch MEVD17.2.K with the ISN+VIN Edit operation covers BMW Group group vehicles (BMW, Mini). The system detects the exact version from the uploaded dump.
What memory and processor does Bosch MEVD17.2.K use?
Memory of the unit: INT FLASH — TC1793, INT EEPROM — TC1793. The ISN+VIN Edit operation needs INT FLASH [TC1793] · INT EEPROM [TC1793] access.