Bosch EDC17C84 ISK+VIN Edit: Renault–Nissan (Dacia · Renault)
ISK+VIN Edit on the Bosch EDC17C84 control unit for vehicles of the Renault–Nissan group: Dacia, Renault. Upload the dump — free analysis and check; apply the operation and download the ready file in your portal account.
View and edit ISK and VIN in the dump — matching the control unit to the vehicle.
| Operation | ISK+VIN Edit |
|---|---|
| Control unit | Bosch EDC17C84 |
| Car makes | Renault–Nissan — Dacia, Renault |
| Access / memory | INT EEPROM [TC1782] |
| INT FLASH | TC1782 |
| INT EEPROM | TC1782 |
| Method | Online, from the ECU memory dump (.bin) |
| Applicability check | Free |
| Checksums | Recalculated automatically |
| Result | A ready file to write to the unit |
Bosch EDC17C84 ISK+VIN Edit — 37 vehicles
Operation ISK+VIN Edit is supported for the Bosch EDC17C84 block on vehicles of the Renault–Nissan group (Dacia, Renault). In the list: Renault Captur, Dacia Logan, Renault Clio, Dacia Logan Mcv, Renault Espace, Dacia Sandero, Renault Koleos, Dacia Sandero Stepway and 29 more variants. Upload the dump — the system detects the version and checks applicability for free.
| Make | Model | Version | Year |
|---|---|---|---|
| Renault | Captur | 1.5 dCi EDC 6AT | 2018 |
| Dacia | Logan | 1.5 dCi 6MT | 2016 |
| Renault | Clio | 1.5 dCi EDC 6AT | 2016 |
| Dacia | Logan Mcv | 1.5 dCi 6MT | 2017 |
| Renault | Espace | 1.6 dCi 6MT | 2015 |
| Dacia | Sandero | 1.5 dCi 6MT | 2016 |
| Renault | Koleos | 2.0 dCi AT | 2017 |
| Dacia | Sandero Stepway | 1.5 dCi 6MT | 2016 |
| Renault | Logan | 1.5 dCi 6MT | 2016 |
| Dacia | Dokker MPV | 1.5 dCi 5MT | 2015 |
| Renault | Megane | 1.6 dCi 6MT | 2016 |
| Dacia | Dokker Stepway | 1.5 dCi 5MT | 2015 |
| Renault | Sandero | 1.5 dCi 6MT | 2016 |
| Dacia | Duster | 1.5 dCi 6MT | 2015 |
| Renault | Sandero Stepway | 1.5 dCi 6MT | 2016 |
| Dacia | Lodgy MPV | 1.5 dCi 5MT | 2015 |
| Renault | Duster | 1.5 dCi 6MT | 2015 |
| Dacia | Lodgy Stepway | 1.5 dCi 5MT | 2015 |
| Renault | Grand Scenic | 1.6 dCi | 2016 |
| Renault | Kadjar | 1.6 dCi 6MT | 2015 |
| Renault | Kangoo | 1.5 dCi 5MT | 2016 |
| Renault | Megane GT | 1.6 dCi 6AT | 2016 |
| Renault | Scenic | 1.6 dCi | 2016 |
| Renault | Talisman | 1.6 16v dCi 6MT | 2015 |
| Renault | Trafic | 1.6 dCi 6MT | 2015 |
| Dacia | Logan | 1.5 dCi 5MT | 2015 |
| Dacia | Logan Mcv | 1.5 dCi 5MT | 2015 |
| Dacia | Sandero | 1.5 dCi 5MT | 2015 |
| Dacia | Sandero Stepway | 1.5 dCi 5MT | 2015 |
| Renault | Captur | 1.5 dCi 6MT | 2015 |
| Renault | Clio | 1.5 dCi 5MT | 2016 |
| Renault | Espace | 1.6 dCi 6AT | 2015 |
| Renault | Koleos | 2.0 dCi 6MT | 2017 |
| Renault | Logan | 1.5 dCi 5MT | 2015 |
| Renault | Megane | 1.6 dCi 6AT | 2016 |
| Renault | Sandero | 1.5 dCi 5MT | 2015 |
| Renault | Sandero Stepway | 1.5 dCi 5MT | 2015 |
Bosch EDC17C84 ISK+VIN Edit — for Renault–Nissan (Dacia, Renault)
The ISK (Immobiliser Secret Key) and VIN are stored in the ECU dump and must match the car's other units. If they mismatch, the engine won't start or the unit goes into protection.
When you need ISK+VIN Edit
- Control unit replacement — match the ISK and VIN of the new ECU to the car.
- Recovery after a failed write — restore correct ISK/VIN values in the dump.
- View current values — check that the ISK and VIN in the unit are correct.
- VIN edit — match the VIN in the ECU to the car body.
What you get: the ISK and VIN are matched to the car — the unit works correctly with the immobilizer.
Bosch EDC17C84 memory and reading
The Bosch EDC17C84 unit uses the following: INT FLASH — TC1782, INT EEPROM — TC1782. The ISK+VIN Edit operation works on the INT EEPROM [TC1782] area — that is the one to read out and upload. If OBD reading is not available for this unit, the dump is taken on the bench via Bench or Boot mode.
For the Bosch EDC17C84 block the «ISK+VIN Edit» operation runs online from the ECU memory dump (access — INT EEPROM [TC1782]). Read the file via OBD, Bench or Boot and upload it — the system detects Bosch EDC17C84 and checks whether the operation applies for free. You'll get the ready file with recalculated checksums in your portal account.
Frequently asked questions
ISK+VIN Edit on Bosch EDC17C84 — short and to the point
What does ISK+VIN Edit do on Bosch EDC17C84?
View and edit ISK and VIN in the dump — matching the control unit to the vehicle.
Which file should I upload?
The ECU memory dump (access INT EEPROM [TC1782]), read via OBD, Bench or Boot. Upload the file — the system detects Bosch EDC17C84 for free and checks whether the operation applies.
How much does ISK+VIN Edit cost?
Uploading and analyzing the file is free. Applying the operation and downloading the ready file happen in your portal account (50 €).
Are the checksums recalculated?
Yes, automatically. The ready file is immediately writable to the unit — no need to recalculate checksums by hand.
Which vehicles is it for?
Bosch EDC17C84 with the ISK+VIN Edit operation covers Renault–Nissan group vehicles (Dacia, Renault). The system detects the exact version from the uploaded dump.
What memory and processor does Bosch EDC17C84 use?
Memory of the unit: INT FLASH — TC1782, INT EEPROM — TC1782. The ISK+VIN Edit operation needs INT EEPROM [TC1782] access.