Which ECUs do you support?

Bosch EDC15/17 (incl. EDC17C46/C50/C54/C64/C74), MED17, Siemens SIMOS, Continental SID, Delphi DCM6.2/DCM3.x, Magneti Marelli, Temic for TCU. Database is constantly expanding — if your ECU is missing, the engineer disassembles the original via Ghidra and adds it.

What format do you accept for the original ECU?

We accept .bin, .hex, .ori — standard dump from any programmer: KESS3, Autotuner, MPPS, Trasdata, PCMflash, CMD Flash, KTAG. OBD or Bench read — makes no difference.

Who recalculates the file checksums?

Checksums are recalculated automatically in WinOLS5 — all major algorithms supported (Bosch CRC32, Siemens, Delphi, Magneti Marelli). The output is a flash-ready file, no need to run it through a separate checksum solver.

How long does it take to return the Stage file?

30-60 minutes during business hours. The order is created in the portal, the engineer sees it immediately, status updates in real time. Urgent cases can be flagged — we take them first.

Do you do free revisions if the file did not work?

Yes, we redo it at no extra charge. Send the OBD log after flashing — the engineer checks the actual parameters and corrects the calibration. Communication directly via Telegram, no ticketing systems.

What is the payment model — subscription or credits?

Payment in euros, one-time per order, no subscriptions (1 € = 1 portal credit). No monthly fees like ATF, Magicmotorsport and other services.

Yanmar — Stage 1 / Stage 2 parameters database

or choose step by step

Choose a vehicle type

The CHIPOK database holds 4 engines for Yanmar with reverse-engineered ECUs and Stage 1 / Stage 2 target parameters. We cover 4 models. Diesel engines only.

Двигатели и платформы:

Основные двигатели: industrial 3T/4T-series, marine 4LV/4JH/4LH/6LH/6LP, 4JH4, 4JH5, 6BY series (BMW-derived joint), 6LY/6LY3 (440-700 hp), 8LV (320-370 hp V8)
Платформы: Marine common-rail / industrial / construction

Поддерживаемые ЭБУ:

Производители: Bosch / Continental / Denso / Siemens
Конкретные блоки Yanmar в базе: Bosch EDC7UC31 (legacy), EDC17CV41, EDC17CV44, EDC17C53, Yanmar VC10, VC20 (Vessel Control), Yanmar SmartAssist, Yanmar EH700 series, Denso-derived ECMs (on 4JH series), 4JH4-CR, 4LV-CR (Common Rail PCM)
Специфика Yanmar: Bosch ECU + Yanmar-specific adaptations — work via bench

Available options:

Stage 1 tuned for prop/impeller load
Lambda delete
peak hp / torque increase

Условия обслуживания:

Калибровки выполняются вручную в WinOLS5 + Ghidra под конкретный блок управления
Чек-суммы пересчитываются на стороне инженера — файл готов к заливке через актуальный программатор
Возврат файла за 30-60 минут в рабочее время
Бесплатные ревизии по логу OBD