Yanmar 6BY220 212 HP 212hp (156kW) 520Nm — Stage 1 file (+53 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Yanmar 6BY220 212 HP 212hp (156kW) 520Nm ECU

Yanmar 6BY220 (I) 212 HP 212hp (156kW) 520Nm — agricultural diesel engine of the marine segment of the Yanmar Holdings group (Япония, 1912). Stage 1 chip tuning raises power from 212 to 265 hp (+53 hp, +25%) and torque from 520 to 610 Nm (+90 Nm).

Yanmar is a Japanese manufacturer of diesel engines and agricultural machinery, founded in 1912. Yanmar specialises in compact diesel engines for the agricultural and marine segments. DPF/SCR с AdBlue — стандарт на современных Tier 4/Stage V агро-моторах. Сельхоз дизели имеют расширенный набор карт под нагрузку и работу на низких оборотах. Высокомощные агро-дизели — флагманские тракторы и комбайны.

Stage 1 в агросегменте фокусируется на крутящем моменте для тяговых работ. Высокомощные агро-Stage 1 — фокус на снижении расхода под нагрузкой. Сельхозсегмент — расход и тяга важнее л.с. Высокомощные Yanmar — флагманские тракторы и комбайны с уверенным запасом под Stage 1.

Frequently asked questions

How much does the power of the Yanmar 6BY220 212 HP 212hp (156kW) 520Nm increase after Stage 1?

The Stage 1 gain for the Yanmar 6BY220 212 HP 212hp (156kW) 520Nm is 53 hp (+25%) over the stock 212 hp, for a total of 265 hp. Torque rises from 520 to 610 Nm (+90 Nm).

What is Stage 1 chip tuning for the Yanmar 6BY220?

Stage 1 on the Yanmar 6BY220 212 HP 212hp (156kW) 520Nm is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +53 hp with no hardware changes.

What does Stage 1 give on the powerful Yanmar 6BY220 212 HP 212hp (156kW) 520Nm?

The high-output Yanmar 6BY220 212 HP 212hp (156kW) 520Nm has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.

How does Stage 2 differ from Stage 1 on the Yanmar 6BY220 212 HP 212hp (156kW) 520Nm?

Stage 2 on the Yanmar 6BY220 212 HP 212hp (156kW) 520Nm means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.

Does Stage 1 void the warranty on the Yanmar 6BY220?

Stage 1 on the Yanmar 6BY220 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.

How quickly is chip tuning of the Yanmar 6BY220 212 HP 212hp (156kW) 520Nm done?

The full remap cycle for the Yanmar 6BY220 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.

Can you return to stock after Stage 1 on the Yanmar 6BY220?

The original Yanmar 6BY220 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.

How much does Stage 1 cost for the Yanmar 6BY220 212 HP 212hp (156kW) 520Nm?

The cost of Stage 1 for the Yanmar 6BY220 212 HP 212hp (156kW) 520Nm is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.

Last updated: 01.09.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno