Volvo XC 70 2.4 D5 205 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Volvo XC 70 2.4 D5 205 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo XC 70 2.4 D5 205 hp ECU
Volvo XC 70 (2013) 2.4 D5 205 hp — premium diesel engine of the passenger segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 205 to 230 hp (+25 hp, +12%) and torque from 420 to 480 Nm (+60 Nm). In the CHIPOK database: 2 configurations. The 2013 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Volvo is a Swedish premium manufacturer from Gothenburg, founded in 1927. Volvo has been owned by China's Geely Holding since 2010. Volvo is historically known for its engineering-led approach to safety and the environment. DPF/SCR with AdBlue is standard on Euro-6 Volvo diesels. The Volvo D5 (legacy V6) was an iconic premium-segment engine of the 2000s. Volvo uses its own VEA (Volvo Engine Architecture) diesels.
On pre-2017 Volvos, Stage 1 goes in over OBD without Bench. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. High-output Volvo models are premium crossovers with solid headroom for Stage 1.
Frequently asked questions
What power gain do you get after chip tuning the Volvo XC 70 2.4 D5 205 hp?
After Stage 1 the power of the Volvo XC 70 2.4 D5 205 hp rises from 205 to 230 hp, a gain of 25 hp (+12%). Torque rises from 420 to 480 Nm (+60 Nm).
How does Stage 1 differ from stock on the Volvo XC 70?
Stage 1 is a software optimization of the factory ECU firmware of the Volvo XC 70 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Volvo XC 70?
The high-output Volvo XC 70 2.4 D5 205 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Volvo XC 70 2.4 D5 205 hp?
Stage 2 on the Volvo XC 70 2.4 D5 205 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Volvo XC 70 remain valid after Stage 1?
After remapping the Volvo XC 70, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volvo XC 70?
Reading and writing via OBD takes 25-30 minutes on the Volvo XC 70. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volvo XC 70?
Before Stage 1 the original of the Volvo XC 70 2.4 D5 205 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volvo XC 70 2.4 D5 205 hp cost?
The remap price for the Volvo XC 70 2.4 D5 205 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.