Volvo XC 40 1.5 T3 156 hp — Stage 1 file (+34 hp)
hp
Stage 1 file for Volvo XC 40 1.5 T3 156 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo XC 40 1.5 T3 156 hp ECU
Volvo XC 40 (2017) 1.5 T3 156 hp — premium petrol engine of the passenger segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 156 to 190 hp (+34 hp, +22%) and torque from 265 to 305 Nm (+40 Nm). A petrol engine built in 2017 — a Tricore platform without strong protection; OBD access works.
Volvo shares platforms and engines with Geely and Polestar. Volvo is a Swedish premium manufacturer from Gothenburg, founded in 1927. Volvo has been owned by China's Geely Holding since 2010. Polestar Engineered is Volvo's performance engine range. VEA is Volvo's modern modular petrol engine range. Mid-range Volvo turbo petrol engines deliver a noticeable gain with Stage 1.
Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Stage 1 on Volvo petrol engines delivers a noticeable gain. Polestar Optimization provides official Stage files for Volvo from Polestar. Mid-range Volvo models are premium units with a conservative factory calibration, and Stage 1 preserves engine life.
Frequently asked questions
How much does the power of the Volvo XC 40 1.5 T3 156 hp increase after Stage 1?
Stage 1 chip tuning on the Volvo XC 40 1.5 T3 156 hp boosts engine output by 34 hp: from 156 to 190 hp. Torque rises from 265 to 305 Nm (+40 Nm).
What changes in the Volvo XC 40 ECU after Stage 1?
Stage 1 on the Volvo XC 40 1.5 T3 156 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +34 hp with no hardware changes.
Is a Stage 1 remap safe for the 1.5 T3 156 hp?
Stage 1 on the Volvo XC 40 1.5 T3 156 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Volvo XC 40 1.5 T3 156 hp?
Stage 2 for the Volvo XC 40 1.5 T3 156 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Volvo XC 40?
Stage 1 on the Volvo XC 40 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Volvo XC 40 1.5 T3 156 hp done?
The full remap cycle for the Volvo XC 40 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Volvo XC 40?
The original Volvo XC 40 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Volvo XC 40 1.5 T3 156 hp?
The cost of Stage 1 for the Volvo XC 40 1.5 T3 156 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.