Volvo V90 T6 (3.0) 350 hp — Stage 1 file (+24 hp)
hp
Stage 1 file for Volvo V90 T6 (3.0) 350 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo V90 T6 (3.0) 350 hp ECU
Volvo V90 (2016) T6 (3.0) 350 hp — premium petrol engine of the passenger segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 350 to 374 hp (+24 hp, +7%) and torque from 500 to 560 Nm (+60 Nm). A petrol engine built in 2016 — a Tricore platform without strong protection; OBD access works.
Polestar is Volvo's performance division, and a standalone brand since 2017. The Volvo range comprises premium saloons, estates and crossovers (SPA and CMA platforms). Volvo shares platforms and engines with Geely and Polestar. Polestar Engineered is Volvo's performance engine range. VEA is Volvo's modern modular petrol engine range. Polestar Engineered offers significant potential with hardware.
On pre-2017 Volvos, Stage 1 goes in over OBD without Bench. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. Top Volvo Polestar Engineered engines sit at the power ceiling of the Swedish premium segment.
Frequently asked questions
How many horsepower does the Volvo V90 T6 (3.0) 350 hp reach after a remap?
Stage 1 chip tuning on the Volvo V90 T6 (3.0) 350 hp boosts engine output by 24 hp: from 350 to 374 hp. Torque rises from 500 to 560 Nm (+60 Nm).
What changes in the Volvo V90 ECU after Stage 1?
Stage 1 is a software optimization of the factory ECU firmware of the Volvo V90 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +24 hp with no hardware changes.
Does Stage 1 make sense on the Volvo V90 T6 (3.0) 350 hp with this much power?
On the top-spec Volvo V90 T6 (3.0) 350 hp engine, Stage 1 is the starting point before Stage 2 with a downpipe, intake and a larger intercooler. The mass-market factory calibration leaves substantial headroom for an aggressive software tune.
What is Stage 2 for the Volvo V90 T6 (3.0) 350 hp?
Stage 2 for the Volvo V90 T6 (3.0) 350 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Volvo V90 remain valid after Stage 1?
After remapping the Volvo V90, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volvo V90?
Reading and writing via OBD takes 25-30 minutes on the Volvo V90. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volvo V90?
Before Stage 1 the original of the Volvo V90 T6 (3.0) 350 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volvo V90 T6 (3.0) 350 hp cost?
The remap price for the Volvo V90 T6 (3.0) 350 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.