Volvo V60 T6 (2.0) 304 hp — Stage 1 file (+31 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Volvo V60 T6 (2.0) 304 hp ECU

Volvo V60 (2010) T6 (2.0) 304 hp — premium petrol engine of the passenger segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 304 to 335 hp (+31 hp, +10%) and torque from 440 to 500 Nm (+60 Nm). A petrol engine built in 2010 — a Tricore platform without strong protection; OBD access works.

Polestar is Volvo's performance division, and a standalone brand since 2017. The Volvo range comprises premium saloons, estates and crossovers (SPA and CMA platforms). Volvo shares platforms and engines with Geely and Polestar. High-output Volvo turbo petrol engines deliver a solid gain with Stage 1. The factory calibration on Volvo petrol engines is conservative. Polestar Engineered is Volvo's performance engine range.

On pre-2017 Volvos, Stage 1 goes in over OBD without Bench. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. High-output Volvo models are premium crossovers with solid headroom for Stage 1.

Frequently asked questions

How much does the power of the Volvo V60 T6 (2.0) 304 hp increase after Stage 1?

Stage 1 for the Volvo V60 T6 (2.0) 304 hp adds +31 hp — power increases from 304 to 335 hp (+10%). Torque rises from 440 to 500 Nm (+60 Nm).

What does a Stage 1 remap of the Volvo V60 T6 (2.0) 304 hp include?

Stage 1 is a software optimization of the factory ECU firmware of the Volvo V60 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +31 hp with no hardware changes.

Do you need hardware changes for Stage 1 on the Volvo V60?

Stage 1 on the powerful Volvo V60 T6 (2.0) 304 hp “lifts” the factory limiters with no hardware changes. The gain is noticeable in the mid and upper range. There is headroom left for moving to Stage 2 (downpipe + intake + intercooler).

What is Stage 2 for the Volvo V60 T6 (2.0) 304 hp?

Stage 2 for the Volvo V60 T6 (2.0) 304 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.

Does the factory warranty of the Volvo V60 remain valid after Stage 1?

After remapping the Volvo V60, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.

How long is the wait for a Stage 1 remap for the Volvo V60?

Reading and writing via OBD takes 25-30 minutes on the Volvo V60. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.

How do you roll back to the factory firmware of the Volvo V60?

Before Stage 1 the original of the Volvo V60 T6 (2.0) 304 hp is read out and saved — returning to the factory state is possible at any time.

How much does chip tuning the Volvo V60 T6 (2.0) 304 hp cost?

The remap price for the Volvo V60 T6 (2.0) 304 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.

Last updated: 30.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno