Volvo V60 2.4 D5 205 hp — Stage 1 file (+25 hp)
hp
Stage 1 file for Volvo V60 2.4 D5 205 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo V60 2.4 D5 205 hp ECU
Volvo V60 (2010) 2.4 D5 205 hp — premium diesel engine of the passenger segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 205 to 230 hp (+25 hp, +12%) and torque from 420 to 480 Nm (+60 Nm). The 2010 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Volvo is a Swedish premium manufacturer from Gothenburg, founded in 1927. Volvo has been owned by China's Geely Holding since 2010. Volvo is historically known for its engineering-led approach to safety and the environment. Volvo uses its own VEA (Volvo Engine Architecture) diesels. The factory calibration on Volvo diesels is conservative, leaving headroom for Stage 1. High-output Volvo diesels are the premium XC90/XC60 crossovers.
On pre-2017 Volvos, Stage 1 goes in over OBD without Bench. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. High-output Volvo models are premium crossovers with solid headroom for Stage 1.
Frequently asked questions
How much horsepower does Stage 1 add for the Volvo V60 2.4 D5 205 hp?
After Stage 1 the power of the Volvo V60 2.4 D5 205 hp rises from 205 to 230 hp, a gain of 25 hp (+12%). Torque rises from 420 to 480 Nm (+60 Nm).
How does Stage 1 differ from stock on the Volvo V60?
Stage 1 is a software optimization of the factory ECU firmware of the Volvo V60 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +25 hp with no hardware changes.
Do you need hardware changes for Stage 1 on the Volvo V60?
The high-output Volvo V60 2.4 D5 205 hp has a conservative factory calibration aimed at the mass market. Stage 1 unlocks the engine's real potential while turbo and injector life are preserved.
What is Stage 2 for the Volvo V60 2.4 D5 205 hp?
Stage 2 on the Volvo V60 2.4 D5 205 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Volvo V60 remain valid after Stage 1?
After remapping the Volvo V60, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volvo V60?
Reading and writing via OBD takes 25-30 minutes on the Volvo V60. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volvo V60?
Before Stage 1 the original of the Volvo V60 2.4 D5 205 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volvo V60 2.4 D5 205 hp cost?
The remap price for the Volvo V60 2.4 D5 205 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.