Volvo V60 2.0 D3 163 hp — Stage 1 file (+17 hp)
hp
Stage 1 file for Volvo V60 2.0 D3 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo V60 2.0 D3 163 hp ECU
Volvo V60 (2010) 2.0 D3 163 hp — premium diesel engine of the passenger segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 163 to 180 hp (+17 hp, +10%) and torque from 400 to 450 Nm (+50 Nm). The 2010 generation — mid-generation diesels on the EDC17 platform with OBD reading support and no need for Bench.
Volvo is a Swedish premium manufacturer from Gothenburg, founded in 1927. Volvo has been owned by China's Geely Holding since 2010. Volvo is historically known for its engineering-led approach to safety and the environment. The Volvo D5 (legacy V6) was an iconic premium-segment engine of the 2000s. Volvo uses its own VEA (Volvo Engine Architecture) diesels. The factory calibration on Volvo diesels is conservative, leaving headroom for Stage 1.
On pre-2017 Volvos, Stage 1 goes in over OBD without Bench. Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Mid-range Volvo models are premium units with a conservative factory calibration, and Stage 1 preserves engine life. Polestar Optimization provides official Stage files for Volvo from Polestar.
Frequently asked questions
How many horsepower does the Volvo V60 2.0 D3 163 hp reach after a remap?
The Stage 1 gain for the Volvo V60 2.0 D3 163 hp is 17 hp (+10%) over the stock 163 hp, for a total of 180 hp. Torque rises from 400 to 450 Nm (+50 Nm).
What is Stage 1 chip tuning for the Volvo V60?
Stage 1 is a software optimization of the factory ECU firmware of the Volvo V60 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +17 hp with no hardware changes.
What is the risk of Stage 1 on the Volvo V60 2.0 D3 163 hp?
A remap of the Volvo V60 2.0 D3 163 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Volvo V60 2.0 D3 163 hp?
Stage 2 on the Volvo V60 2.0 D3 163 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Volvo V60 remain valid after Stage 1?
After remapping the Volvo V60, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volvo V60?
Reading and writing via OBD takes 25-30 minutes on the Volvo V60. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volvo V60?
Before Stage 1 the original of the Volvo V60 2.0 D3 163 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volvo V60 2.0 D3 163 hp cost?
The remap price for the Volvo V60 2.0 D3 163 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.