Volvo V60 1.6 D2 115 hp — Stage 1 file (+20 hp)

or choose step by step
1
Choose a vehicle type

Chip tuning for Volvo V60 1.6 D2 115 hp ECU

Volvo V60 (2010) 1.6 D2 115 hp — premium diesel engine of the passenger segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 115 to 135 hp (+20 hp, +17%) and torque from 270 to 330 Nm (+60 Nm). A diesel built in 2010 — the Tricore ECU era; OBD flash works on most production revisions.

Polestar is Volvo's performance division, and a standalone brand since 2017. The Volvo range comprises premium saloons, estates and crossovers (SPA and CMA platforms). Volvo shares platforms and engines with Geely and Polestar. DPF/SCR with AdBlue is standard on Euro-6 Volvo diesels. The Volvo D5 (legacy V6) was an iconic premium-segment engine of the 2000s. Volvo uses its own VEA (Volvo Engine Architecture) diesels.

Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Stage 1 on Volvo diesels delivers a noticeable torque gain. Polestar Optimization provides official Stage files for Volvo from Polestar. Mid-range Volvo models are premium units with a conservative factory calibration, and Stage 1 preserves engine life.

Frequently asked questions

What power gain do you get after chip tuning the Volvo V60 1.6 D2 115 hp?

Stage 1 chip tuning on the Volvo V60 1.6 D2 115 hp boosts engine output by 20 hp: from 115 to 135 hp. Torque rises from 270 to 330 Nm (+60 Nm).

What changes in the Volvo V60 ECU after Stage 1?

Stage 1 is a software optimization of the factory ECU firmware of the Volvo V60 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.

What is the risk of Stage 1 on the Volvo V60 1.6 D2 115 hp?

A remap of the Volvo V60 1.6 D2 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.

What is Stage 2 for the Volvo V60 1.6 D2 115 hp?

Stage 2 for the Volvo V60 1.6 D2 115 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.

Does the factory warranty of the Volvo V60 remain valid after Stage 1?

After remapping the Volvo V60, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.

How long is the wait for a Stage 1 remap for the Volvo V60?

Reading and writing via OBD takes 25-30 minutes on the Volvo V60. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.

How do you roll back to the factory firmware of the Volvo V60?

Before Stage 1 the original of the Volvo V60 1.6 D2 115 hp is read out and saved — returning to the factory state is possible at any time.

How much does chip tuning the Volvo V60 1.6 D2 115 hp cost?

The remap price for the Volvo V60 1.6 D2 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.

Last updated: 30.08.2026 · Source: manufacturer technical documentation · Measurements: CHIPOK dyno