Volvo V50 1.6 D2 115 hp — Stage 1 file (+20 hp)
hp
Stage 1 file for Volvo V50 1.6 D2 115 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo V50 1.6 D2 115 hp ECU
Volvo V50 (2007) 1.6 D2 115 hp — premium diesel engine of the passenger segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 115 to 135 hp (+20 hp, +17%) and torque from 270 to 330 Nm (+60 Nm). The 2007 generation — first-generation CDI/TDI/HDi diesels with relatively simple ECU protection; OBD reading works directly.
Volvo is a Swedish premium manufacturer from Gothenburg, founded in 1927. Volvo has been owned by China's Geely Holding since 2010. Volvo is historically known for its engineering-led approach to safety and the environment. The factory calibration on Volvo diesels is conservative, leaving headroom for Stage 1. Mid-range Volvo diesels are a mainstream chip tuning subject in Scandinavia. DPF/SCR with AdBlue is standard on Euro-6 Volvo diesels.
Stage 1 on Volvo diesels delivers a noticeable torque gain. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. Mid-range Volvo models are premium units with a conservative factory calibration, and Stage 1 preserves engine life. Polestar Optimization provides official Stage files for Volvo from Polestar.
Frequently asked questions
How much does the power of the Volvo V50 1.6 D2 115 hp increase after Stage 1?
After Stage 1 the power of the Volvo V50 1.6 D2 115 hp rises from 115 to 135 hp, a gain of 20 hp (+17%). Torque rises from 270 to 330 Nm (+60 Nm).
How does Stage 1 differ from stock on the Volvo V50?
Stage 1 is a software optimization of the factory ECU firmware of the Volvo V50 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +20 hp with no hardware changes.
What is the risk of Stage 1 on the Volvo V50 1.6 D2 115 hp?
A remap of the Volvo V50 1.6 D2 115 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Volvo V50 1.6 D2 115 hp?
Stage 2 on the Volvo V50 1.6 D2 115 hp means software + hardware (exhaust, intake, intercooler). The gain depends on the specific hardware combination.
Does the factory warranty of the Volvo V50 remain valid after Stage 1?
After remapping the Volvo V50, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volvo V50?
Reading and writing via OBD takes 25-30 minutes on the Volvo V50. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volvo V50?
Before Stage 1 the original of the Volvo V50 1.6 D2 115 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volvo V50 1.6 D2 115 hp cost?
The remap price for the Volvo V50 1.6 D2 115 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.