Volvo V40 2.0 D2 EU6 120 hp — Stage 1 file (+60 hp)
hp
Stage 1 file for Volvo V40 2.0 D2 EU6 120 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo V40 2.0 D2 EU6 120 hp ECU
Volvo V40 (2015) 2.0 D2 EU6 120 hp — premium diesel engine of the passenger segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 120 to 180 hp (+60 hp, +50%) and torque from 280 to 380 Nm (+100 Nm). A diesel built in 2015 — the Tricore ECU era; OBD flash works on most production revisions.
Polestar is Volvo's performance division, and a standalone brand since 2017. The Volvo range comprises premium saloons, estates and crossovers (SPA and CMA platforms). Volvo shares platforms and engines with Geely and Polestar. The factory calibration on Volvo diesels is conservative, leaving headroom for Stage 1. Mid-range Volvo diesels are a mainstream chip tuning subject in Scandinavia. DPF/SCR with AdBlue is standard on Euro-6 Volvo diesels.
Stage 1 on Volvo diesels delivers a noticeable torque gain. On pre-2017 Volvos, Stage 1 goes in over OBD without Bench. Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. Polestar Optimization provides official Stage files for Volvo from Polestar. Mid-range Volvo models are premium units with a conservative factory calibration, and Stage 1 preserves engine life.
Frequently asked questions
How much does the power of the Volvo V40 2.0 D2 EU6 120 hp increase after Stage 1?
Stage 1 for the Volvo V40 2.0 D2 EU6 120 hp adds +60 hp — power increases from 120 to 180 hp (+50%). Torque rises from 280 to 380 Nm (+100 Nm).
What does a Stage 1 remap of the Volvo V40 2.0 D2 EU6 120 hp include?
Stage 1 is a software optimization of the factory ECU firmware of the Volvo V40 with no hardware changes. The injection, boost, ignition-timing and torque maps are reprogrammed. The gain is +60 hp with no hardware changes.
What is the risk of Stage 1 on the Volvo V40 2.0 D2 EU6 120 hp?
A remap of the Volvo V40 2.0 D2 EU6 120 hp is safe — the factory calibration in this mid-range class is conservative, leaving genuine headroom for Stage 1 with no hardware changes.
What is Stage 2 for the Volvo V40 2.0 D2 EU6 120 hp?
Stage 2 for the Volvo V40 2.0 D2 EU6 120 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does the factory warranty of the Volvo V40 remain valid after Stage 1?
After remapping the Volvo V40, the official factory warranty on the engine and gearbox is lost (this applies to any manufacturer when the ECU is modified). CHIPOK guarantees the quality of the calibration and free revisions.
How long is the wait for a Stage 1 remap for the Volvo V40?
Reading and writing via OBD takes 25-30 minutes on the Volvo V40. Bench reading (BDM/JTAG) takes about 60 minutes plus refitting. Remote file processing at CHIPOK takes 5-30 minutes.
How do you roll back to the factory firmware of the Volvo V40?
Before Stage 1 the original of the Volvo V40 2.0 D2 EU6 120 hp is read out and saved — returning to the factory state is possible at any time.
How much does chip tuning the Volvo V40 2.0 D2 EU6 120 hp cost?
The remap price for the Volvo V40 2.0 D2 EU6 120 hp is dynamic and is calculated in the CHIPOK calculator based on the selected options. A credit-based payment model, with no subscription fees.