Volvo S80 2.4 D3 163 hp — Stage 1 file (+62 hp)
hp
Stage 1 file for Volvo S80 2.4 D3 163 hp
Target +0 hp. Custom development for your engine.
Chip tuning for Volvo S80 2.4 D3 163 hp ECU
Volvo S80 (2006) 2.4 D3 163 hp — premium diesel engine of the passenger segment of the Geely Holding (с 2010) group (Швеция, 1927). Stage 1 chip tuning raises power from 163 to 225 hp (+62 hp, +38%) and torque from 340 to 460 Nm (+120 Nm). Diesel engines built in 2006 — the era of classic Common Rail without strong encryption.
Volvo shares platforms and engines with Geely and Polestar. Volvo is a Swedish premium manufacturer from Gothenburg, founded in 1927. Volvo has been owned by China's Geely Holding since 2010. Volvo uses its own VEA (Volvo Engine Architecture) diesels. The factory calibration on Volvo diesels is conservative, leaving headroom for Stage 1. Mid-range Volvo diesels are a mainstream chip tuning subject in Scandinavia.
Within Geely Holding, ECUs are partly shared with Polestar and some Geely models. Stage 1 on Volvo diesels delivers a noticeable torque gain. The Volvo community in Scandinavia and Eastern Europe has a large pool of ready-made Stage files. Polestar Optimization provides official Stage files for Volvo from Polestar. Mid-range Volvo models are premium units with a conservative factory calibration, and Stage 1 preserves engine life.
Frequently asked questions
How much horsepower does Stage 1 add for the Volvo S80 2.4 D3 163 hp?
Stage 1 for the Volvo S80 2.4 D3 163 hp adds +62 hp — power increases from 163 to 225 hp (+38%). Torque rises from 340 to 460 Nm (+120 Nm).
What does a Stage 1 remap of the Volvo S80 2.4 D3 163 hp include?
Stage 1 on the Volvo S80 2.4 D3 163 hp is a software ECU calibration with no hardware changes. The key maps (boost/ignition/lambda/torque) are adjusted while factory tolerances are preserved. The gain is +62 hp with no hardware changes.
Is a Stage 1 remap safe for the 2.4 D3 163 hp?
Stage 1 on the Volvo S80 2.4 D3 163 hp is developed while keeping the factory AFR, knock control and temperature limits. Engine life is preserved provided regular maintenance is carried out.
How does Stage 2 differ from Stage 1 on the Volvo S80 2.4 D3 163 hp?
Stage 2 for the Volvo S80 2.4 D3 163 hp is Stage 1 plus hardware changes: a downpipe, a larger intake and a performance intercooler. The gain is considerably higher, but it requires professional component selection.
Does Stage 1 void the warranty on the Volvo S80?
Stage 1 on the Volvo S80 voids the factory warranty on the engine and transmission — this is standard for all manufacturers. CHIPOK provides its own warranty on the quality of the remap.
How quickly is chip tuning of the Volvo S80 2.4 D3 163 hp done?
The full remap cycle for the Volvo S80 — from reading to writing the final file — takes 30-90 minutes depending on the ECU access method. The file is prepared at CHIPOK in 5-30 minutes.
Can you return to stock after Stage 1 on the Volvo S80?
The original Volvo S80 ECU is always saved before flashing. Rolling back to the factory firmware is done with the same programmer in 25-30 minutes.
How much does Stage 1 cost for the Volvo S80 2.4 D3 163 hp?
The cost of Stage 1 for the Volvo S80 2.4 D3 163 hp is calculated in the calculator on this page — you select the options (DPF off, EGR off, AdBlue off, DTC off, etc.) and the price is capped by the package Max Price. Payment is by credits (1 cr = 1 €), with no subscriptions.